Celestron SPX900 manual 111

8-6-6					TC/UB
	Items/					Adjustable		Remarks
Data Saved						Range
UB MODE						USER	Select the user bits mode.
						TIME	USER:Select UB value set in the LCD
						DATE		section.
						EXT	TIME: Select local time (hours, minutes,
						TCG		seconds).
						FRM RATE	DATE: Select local date and time (2 last
								digits of year, month, date, time).
						REGEN	EXT:
								Slaved to UB from TC-IN. If reading
								fails, USER value is retained.
							TCG: TCG value enters UB.
							FRM RATE:
								Select same camera shoting
								information (frame rate, etc.) with the
								VAUX UB (VITC UB).
							REGEN:Read out value stored in the card
–	C	U	F	–				and record value continuously.
VITC UB MODE						USER/EXT	Select the user bits mode for VAUX TC
						TIME	(VITC).
						DATE	USER/EXT:
						TCG		If UB MODE is set to EXT, the EXT
						FRM RATE		value is recorded. If not, USER value
						REGEN		set by UB is recorded.
							TIME: Select local time (hours, minutes,
								seconds).
							DATE: Select local date and time (2 last
								digits of year, month, date, time).
							TCG: TCG value enters UB.
							FRM RATE:
								Select same camera shoting
								information (frame rate, etc.) with the
								VAUX UB (VITC UB).
							REGEN:Read out value stored in card and
–	C	U	F	–				record value continuously.
TCG SET HOLD						ON	ON/OFF switching for the feature that
						OFF	always starts recording (when the power is
							turned ON again) the TCG value that was
							set before the power is turned OFF.
–	C	U	F	–
FIRST REC TC						REGEN	For the first recording after the power is
						PRESET	turned on, a P2 card is inserted and then
							switching from this P2 card to another
							recording-target P2 card is performed,
							select whether or not to regenerate the time
							code as the value on the new P2 card.
							REGEN:For clips recorded on the recording-
								target P2 card, regenerate the time
								code as the time code of the clip that
								has the most recent date and time.
							PRESET:
								Use the camera-recorder’s internal
								time code.
							<Note>
							Set the date and time accurately. For
							guidance on setting, see [4-5-2 Setting the
–	C	U	F	–			Internal Clock’s Date and Time].
P.OFF LCD						ON	Select whether or not to display the time
DISPLAY						OFF	code setting and counter indication on the
							LCD monitor when the power is turned OFF.
							ON:	Display setting and indication while
								the power is turned OFF.
							OFF: Power-down LCD monitor while
								camera power is turned OFF. Setting
								and indication disabled.
–	C	U	F	–

	Items/				Adjustable	Remarks
Data Saved					Range
TC OUT					TCG	Select the time code to be output to the time
					TCG/TCR	code output connector.
						TCG: Always output time code generator
						value.
						TCG/TCR:
						Display time code generator value in
						E-E mode, and time code reader
						value in V-V mode.
–	C	U	F	–

8-6-7					UMID SET/INFO
	Items/					Adjustable	Remarks
Data Saved						Range
COUNTRY						NO-INFO	Input the user’s country. NO-INFO is
							displayed until the input completes.
–	C	U	F	–
	ORGANIZATION					NO-INFO	Input the user’s organisation or company
							name. NO-INFO is displayed until the input	8
							completes.
–	C	U	F	–
USER						NO-INFO	Input the user name. NO-INFO is displayed
							until the input completes.
–	C	U	F	–
DEVICE NODE							Indicate the product ID number.
–	–	–	–	–
<Note>

Please refer to [4-5-6 Setting the UMID Information] for the UMID information setting.

The ____ in the Adjustable Range column indicates the preset mode.

111