Press the Shot Mark button.

6-5 Switching the Thumbnail Display

The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Press the MENU BAR button. The pointer moves to the menu bar.

6-6 Shot Mark

A shot mark can be added to a clip thumbnail to distinguish this clip from the others.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Use the cursor buttons to move the pointer over the clip to which you want to attach a shot mark.

3

MENU BAR Button

3 Move the pointer over THUMBNAIL and press the SET button to select it. A sub-menu appears. Switch the thumbnail display by selecting one of the following items:

ALL CLIPS:

Display all clips.

SELECTED CLIPS:

Display randomly selected clips.

MARKED CLIPS:

Display clips with shot marks attached.

VOICE MEMO CLIPS:

Display clips with voice memo data attached.

SLOT CLIPS:

Display clips recorded in the P2 card inserted in the specified slot.

When this item is selected, SLOT1 to SLOT5 are displayed as a sub-menu. Select the desired slot to display the clips.

SET UP:

Please refer to [6-12 Setting the Thumbnail Display Mode] for information about this item.

EXIT:

Close the sub-menu.

6

Shot Mark Button

4 A shot mark will be attached to the clip thumbnail under the pointer.

To delete a shot mark, reposition the pointer over the clip and press the Shot Mark button.

<Notes>

z A shot mark can be attached during recording. Please refer to [3-9 Shot Mark Function] for more information.

z When adding a shot mark to (or deleting the shot mark from) a clip recorded across multiple P2 cards, do this with all these P2 cards inserted into P2 card slots.

79