Celestron SPX900 manual 94

8-2-5					LCD MONITOR
	Items/					Adjustable		Remarks
Data Saved						Range
BRIGHTNESS						–7	Adjust the LCD monitor brightness.
						:
						+0
						:
–	C	U	F	–		+7
COLOR LEVEL						–7	Adjust the LCD monitor chroma level.
						:
						+0
						:
–	C	U	F	–		+7
	CONTRAST					–7	Adjust the LCD monitor contrast.
						:
						+0
						:
–	C	U	F	–		+7
	BACKLIGHT					HIGH	Select whether or not to set the LCD monitor
						NORMAL	brightness to always high.
							HIGH:	Set to always high.
							NORMAL: The brightness changes
								according to the BRIGHTNESS
								setting.
–	C	U	F	–
SELF SHOOT						NORMAL	Select whether or not to change the LCD
						MIRROR	monitor to mirror image.
							NORMAL:	Do not change to mirror image.
							MIRROR:	Change to mirror image.
–	C	U	F	–
ASPECT CONV.						LT.BOX	Select a screen ratio for images displayed
						SQUEEZE	on the LCD monitor.
							LT.BOX: Display images in the letter box
								size.
							SQEEZE: Display images in the squeeze size.
							<Note>
							This item is enabled only when ASPECT
							described in “8-2-1 SYSTEM MODE” is set
–	C	U	F	–
							to16:9.

8-2-6					GENLOCK
	Items/					Adjustabl	Remarks
Data Saved						e Range
GENLOCK						INT	Switch the camera synchronising signal.
						EXT	INT: Synchronise with the internal
							reference signal regardless of the
							reference signal input to the
							GENLOCK IN terminal.
							EXT: Synchronise with the reference signal
							input to the GENLOCK IN terminal.
–	C	U	F	E
H	PHASE					–50	Perform coarse phase adjustment for
COARSE						:	horizontal hold when configuring a system.
						+00
						:
–	–	–	–	–		+50
H	PHASE FINE					–160	Perform fine phase adjustment for horizontal
						:	hold when configuring a system.
						+000	<Note>
						:	This adjustment simultaneously shifts the SC
						+160
							phase.
–	–	–	–	–
SC	PHASE					0	Perform coarse SC PHASE adjustment when
COARSE						1	GENLOCK is set.
						:
						3
–	–	–	–	–
SC	PHASE					–75	Perform fine SC PHASE adjustment when
FINE						:	GENLOCK is set.
						+00	<Note>
						:	When adjusting GENLOCK, please adjust H
						+75
							PHASE first, and then adjust SC PHASE.
–	–	–	–	–

8-3					PAINT
8-3-1					ROP
	Items/					Adjustable	Remarks
Data Saved						Range
MASTER PED						–200	Set the master pedestal level.
						:
						+008
						:
S	C	U	F	E		+200
MASTER DTL						–31	Set the H Detail and V Detail levels.
						:
						+00
						:
S	C	U	F	E		+31
MASTER						0.35	Set MASTER GAMMA in 0.01 steps.
GAMMA						:
						0.45
						:
S	C	U	F	E		0.75
KNEE POINT						70.0%	Set the KNEE POINT position in 0.5% steps.
						:
						85 0%
						:
S	C	U	F	E		107.0%
KNEE SLOPE						0	Set the KNEE slope.
						:
						50
						:
S	C	U	F	E		99
R	GAIN					–200	Set the Rch gain.
						:
						+000
						:
S	C	U	F	E		+200
G	GAIN					–200	Set the Gch gain.
						:
						+000
						:
S	C	U	F	E		+200
B	GAIN					–200	Set the Bch gain.
						:
						+000
						:
S	C	U	F	E		+200
R	PEDESTAL					–100	Set the Rch pedestal level.
						:
						+000
						:
S	C	U	F	E		+100
G	PEDESTAL					–100	Set the Gch pedestal level.
						:
						+000
						:
S	C	U	F	E		+100
B	PEDESTAL					–100	Set the Bch pedestal level.
						:
						+000
						:
S	C	U	F	E		+100

The ____ in the Adjustable Range column indicates the preset mode.

94