Take the following steps to prepare the camera for connecting audio input devices.
The
1 Open the microphone holder.
Using an External Wireless Receiver
Mount a wireless receiver when using a wireless system.
1
2 Align the grooves in the camera attachment with the pins on the unit (e.g., the battery case), and mount the wireless receiver.
Audio Output Jack
Wireless Receiver
2 Mount the microphone and tighten the clamping screw.
Clamping Screw
3 Connect the microphone cable to the MIC IN jack on the camera.
MIC IN Jack
4 Set the AUDIO IN switch to [FRONT] depending on the audio channel to be recorded.
AUDIO IN
Switch
Camera Attachment
XLR Cable
AUDIO IN Jack
AUDIO IN Switch
3 Connect the wireless receiver to the AUDIO IN jack with the XLR cable.
4 Set the AUDIO IN switch to [REAR] for the channel to which the XLR cable is connected.
5 Set the LINE/MIC/+48V selector switch on the rear panel to [MIC].
To remove the wireless receiver, raise the lever on the bottom of the camera attachment.
<Note>
Please refer to the wireless receiver’s instruction manual for such information as operation of the wireless receiver.
72