4 To format the SD card, turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the SD card has been formatted, the following message appears:
To write set data on an SD card:
1 Navigate the menu to the <SD CARD READ/WRITE> screen.
To select a file number:
2 Turn the JOG dial button to move the cursor to the option [W. SELECT]. Then, press the dial button.
4
The card will not be formatted if the following message appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
CONFIG NG | Insert an SD card. |
NO CARD |
|
(No SD card inserted.) |
|
|
|
CONFIG NG | The card may be defective. |
ERROR | Replace the card. |
(SD card cannot be formatted.) |
|
|
|
CONFIG NG | Remove the card and cancel the |
WRITE PROTECT | protect. |
(SD card is |
|
|
|
CONFIG NG | Example: The SD card is not |
CANNOT ACCCESS | accessible because it is being |
(SD card not accessible). | played back. |
| After the operation in process, |
| format the card. |
|
|
5 To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ- SPX900E is indicated at the top and bottom of the viewfinder screen.
<Note>
If an SD card is inserted or removed with the <SD CARD READ/WRITE> screen open, the data title cannot be edited.
Move the cursor to the option TITLE READ and press the JOG dial button.
Edit the data title.
3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.
To give the selected file a title:
4 Turn the JOG dial button to move the cursor to the option [TITLE:].
5 Press the JOG dial button. This moves the cursor to the entry area, putting the
57