The post bracket assembly can be mounted several places on the gate post. Refer to page 11 for mounting options. Place the operator arm against gate post at the desired vertical position and temporarily secure post bracket with a clamp. The gate operator (arm) must be level.
Open the gate to desired open position (no greater than 100°) and hold operator against gate. Mark mounting holes on gate for reference. Temporarily secure the gate bracket using a clamp.
For push to open installations refer to instructions with push to open kit
7 Hold the post bracket in the desired position. Align the extension bracket to a position as CLOSE AS POSSIBLE above the marker. Insert hex bolt through extension bracket and post bracket and secure with washer, lock washer and nut.
Hex Bolt 3/8"
Washer 
Lock Washer
Nut
15 | Installation |