Chamberlain LA412, LA412-S WIRING, Connect the Gate Operator (Gate 1) to the Control Box, 1 WATERTIGHT CONNECTOR NUT, 2 INSERT THE OPERATOR CABLE

WIRING

WARNING

To reduce the risk of SEVERE INJURY or DEATH:

•BEFORE installing power wiring or control stations be sure to follow ALL specifications and warnings described below.

•ANY maintenance to the operator or in the area near the operator MUST not be performed until the batteries are disconnected. Upon completion of maintenance the area MUST be cleared and secured, at that time the unit may be returned to service.

•ALL electrical connections MUST be made by a qualified individual.

•DO NOT install ANY wiring or attempt to run the operator without consulting the wiring diagram. We recommend that you install an optional reversing edge BEFORE proceeding with the control station installation.

Connect the Gate Operator (Gate 1) to the Control Box

1 WATERTIGHT CONNECTOR NUT

Insert the operator cable through the watertight connector nut.

Watertight Connector Nut

Operator

Cable

2 INSERT THE OPERATOR CABLE

Insert the watertight connector into the bottom of the control box and tighten with nut. Insert the operator cable through the watertight connector mounted in the bottom of the control box.

Nut

Watertight			18
Connector	30	30	Control	Box

Operator

Watertight Cable

Connector

Watertight

Connector Nut

			Can	Cause
	ving	Gate	Death
Mo		y or
	Injur

Operator Cable

21 Wiring