Christie Digital Systems CSP70 user manual RGB400 Active Loop-Thru, Input Module, 38-804607-xx

Appendix F: Optional Input Modules

RGB400 Active Loop-Thru	' The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal
Input Module	Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input
38-804607-xx	signals from computers or other RGB source devices. Video inputs are 75Ω
	terminated. Video outputs provide buffered loop-through to another display device.

RGB400ALT Features

◊ accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync)

◊ accepts YPbPr, composite (on green) and Y/C (on red/blue) ◊ BNC connectors for RGB signal inputs

◊ buffered loop-through video outputs

	NOTE: The audio connectors are not functional.
PC250 Analog	' The PC250 Analog Input Module may be installed in this projector, a Marquee Signal
Input Module	Switcher or a Marquee Case/Power Supply. The module receives analog RGB input
38-804609-xx	signals from IBM PC compatibles or Macintosh computers. Video inputs are 75Ω
	terminated. Video outputs are provided for buffered loop-through to another display
	device.

PC250 Analog Features

◊accepts VGA or MAC RGB video

◊15 pin D connectors for video

◊active loop-through video outputs

NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2) The audio connectors are not functional. 3) Trademarks are the rights of their respective owners.

F-2 RPMSP & CSP70-D100U User’s Manual