Christie Digital Systems CSP70 user manual Channel Edit Step

Section 3: Operation

Figure 3.8. Deleting a Channel

TO DELETE MULTIPLE CHANNELS, highlight any channel in the Channel Setup menu and press Func to go to the Channel Copy/Delete submenu. Select “Delete Unlocked

Only” and press to delete all unlocked channels. Or select “Delete All Channels”

to delete all channels, even those that are locked. In either case, the current channel will remain but will be redefined from projector defaults.

NOTE: For any deletion, a confirmation box appears to make sure that you really want to delete. Select “Cancel” if you don’t want to delete after all.

Editing a Channel Setup ' The basic setups that describe how and where a channel can be accessed are listed in the Channel Setup menu. These channel setups can be edited at any time in the Channel Edit submenu.

CHANNEL EDIT — STEP 1	From the presentation level press Menu to display the main menu. To display the
	Channel Setup menu, press “3”, or move the highlight to the Channel Setup option
	and press	. The Channel Setup menu will appear.
CHANNEL EDIT — STEP 2	To edit parameters shown in the Channel Setup menu, select the relevant channel and
	press	. The Channel Edit menu will appear similar to the sample shown in Figure
	3.9.

Figure 3.9. Channel Edit Menu (SAMPLE)

CHANNEL EDIT — STEP 3 If desired, review and/or edit the following channel setups in the Channel Edit menu:

•CHANNEL NAME: An alpha-numeric label can be defined and/or changed here. Channel names can be up to 12 characters in length.

•CHANNEL NUMBER: A 2-digit channel number can be changed here. NOTES: 1) If you enter a channel number that already exists, a dialog message appears

3-16 RPMSP & CSP70-D100U User’s Manual