12
63. Engage the glove box (1) hinges to the instrument
panel.
64. Press the two glove box stops (2) and ra ise the glove
box upward.
65. Close the glove box.
66. Position the instrument panel center bezel (1) near the
IP and connect the wire harness connectors.
67. Install the instrument panel center bezel onto the IP
and fully engage the retainer clips.
68. Install the two lower screws (2).
69. If necessa ry, install the close out panel (2) or
cupholder and install the screws (3).
Aug 08, 2008 K6860631Rev. 1