3
18. Solder (3) the connection (2) together using rosin core sol-
der (1).
19. Center the heat shrink tubing (2) over the solder joint and
heat using a heat gun. Heat the joint until the tubing is
tightly sealed and sealant (1) comes out of both ends of
the tubing.
20. Connect the electrical connector to the cigarette
lighter outlet and firmly seat the outlet to the shifter
housing.
21. Install the trim ring (5) onto the shifter console (6) and
seat fully.
22. Install the screws (2).
23. Insta llth e bezel (4) onto the trim ring (5) and seat fully.
24. Install the shift knob (3) onto the shifter (1) and seat
fully.
25. Connect the battery negative cable.
Aug 08, 2008 K6860631 Rev. 1