8
57. Align and install the cowl trim coverby sliding the rear
tabs of the cowl trim cover under the B-pillar trim.
58. Using hand pressure, install the clips (3) into the body
and the A-pillar (2).
59. Install the close out panel and fasteners.
60. Plac e the glove box in position and slide the glove box
to the left to engage the hinges.
61. Close the glove box.
62. Position the center bezel and connect the electrical
connectors.
63. Using hand pressure, seat the retaining clips starting
with the lower clips first.
64. Place the tra nsmission into park and release the park-
ing brake.
65. Connect the negative battery cable.
66. Verify system operation.
Aug 08, 2008 K6860631 Rev. 1