
Adding, Viewing, Editing, and Deleting Users
Call Screening | Option Box | |
| Check the Enabled option box to enable the Call Screening feature for the | |
| user. | |
|
| Note |
|
| |
|
| |
|
| For version 1.3.0 of VOCAL, phone numbers entered for call screening |
|
| must include the area code, regardless if they are local or |
|
| phone numbers. Call Processing Language does not provide a pattern |
|
| matching method that differentiates seven digit (local) phone numbers |
|
| from ten digit |
| Pull Down Menu | |
| The pull down menu allows you to select a Feature server group from the pull | |
| down menu. The list of Feature server groups in the pull down menu | |
| corresponds to the Feature server groups provisioned under servers/ | |
| featureServer/serverType CallScreening. You can load balance users | |
| among different Feature Server groups. A load balancing utility is not | |
| included in version 1.3.0 of VOCAL. | |
|
|
|
CallerIDBlocking | Option Box | |
| Check the CallerIDBlocking option box to enable the CallerID Blocking | |
| feature for the user. | |
| Pull Down Menu | |
| The pull down menu allows you to select a Feature server group from the pull | |
| down menu. The list of Feature server groups in the pull down menu | |
| corresponds to the Feature server groups provisioned under servers/ | |
| featureServer/serverType CallerIDBlocking. You can load balance users | |
| among different Feature Server groups. A load balancing utility is not | |
| included in version 1.3.0 of VOCAL. | |
|
|
|
ForwardNoAnswer | Option Box | |
| Check the ForwardNoAnswer option box to enable the ForwardNoAnswer | |
| feature for the user. | |
| Pull Down Menu | |
| The pull down menu allows you to select a Feature server group from the pull | |
| down menu. The list of Feature server groups in the pull down menu | |
| corresponds to the Feature server groups provisioned under servers/ | |
| featureServer/serverType ForwardNoAnswer. You can load balance users | |
| among different Feature Server groups. A load balancing utility is not | |
| included in version 1.3.0 of VOCAL. | |
| Failure Case | |
| Users can specify a number where calls are forwarded to when Call Forward | |
| No Answer or Call Forward Busy is turned on by the user. Refer to “Editing | |
| User Feature: Edit User Screen” section on page | |
| setting the user feature. | |
| The administrator can specify a failure case number or address. Incoming | |
| calls will be forwarded to this failure case number or address if the system | |
| receives a failure message instead of busy messages or a no answer signal. |