Cisco Systems 1900 Series manual TIA/EIA/IS-968

Chapter 1 Overview of the Router

Specifications

Table 1-7 Cisco 1905 and 1921 Series Router Specifications1

Description	Specification
Safety compliance	UL 60950-1
	CAN/CSA C22.2 No. 60950-1
	EN 60950-1
	AS/NZS 60950-1
	IEC 60950-1
	For detailed compliance information, see Regulatory Compliance
	and Safety Information for Cisco 1900 Series Routers.
Telecom	TIA/EIA/IS-968
	CS-03
	ANSI T1.101
	IEEE 802.3
	RTTE Directive
	For detailed compliance information, see Regulatory Compliance
	and Safety Information for Cisco 1900 Series Routers.

1.Refer to the Cisco 1900 Series Integrated Services Routers Data Sheet for additional information.

2.Rack unit (RU

3.480 Mb/s individually, bandwidth is shared when both are used.

4.Auto-MDIX=auto media-dependent interface cross over.

		Table 1-8		Cisco 1940 Series Router Specifications1
		Description			Specification
		Physical
		Dimensions without rubber feet			3.5 x 13.5 x 11.5 in. (8.9 x 34.3 x 29.2 cm), 2 RU2 height
		(H x W x D)
		Rack-mount 19 in. (48.3 cm)			Included
		EIA
		Weight (no modules installed)			Approximately 12 lbs
		Weight with PoE			12.8 lbs
		Maximum Weight-Fully			14.0 lbs
		Configured
		Power
		AC input power
		•	Input voltage		100 to 240 VAC, autoranging
		•	Frequency		47 to 63 Hz
		•	Input current (max)		1.5 to 0.6 A
		• Typical power (no modules)			35 W
		• Power (max) with AC			110 W
		• Power (max) with PoE			110 W
			(platform only)
	Cisco 1900 Series Hardware Installation
1-16					OL-19084-02