7-23
Catalyst2950 Desktop Switch Software Configuration Guide
78-11380-05
Chapter7 Administering the Swi tc h Controlling Switch Access with RADIUS
Step3 aaa authentication login {default |
list-name} method1 [method2...]Create a login authentication method list.
•To create a default list that is used when a named list is not specified
in the login authentication command, use the default keyword
followed by the methods that are to be used in default situations. Th e
default method list is automatically applied to all interfaces.
•For list-name, specify a character string to name the list you are
creating.
•For method1..., specify the actual method the authentication
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
–
enable—Use the enable password for authentication. Before you
can use this authentication method, you must define an enable
password by using the enable password global configuration
command.
–
group radius—Use RADIUS authentication. Before you can use
this authentication method, you must configure the RADIUS
server. For more information, see the “Identifying the RADIUS
Server Host” section on page 7-19.
–
line—Use the line password for authentication. Before you can
use this authentication method, you must define a line password.
Use the password password line configuration command.
–
local—Use the local username database for authen tic atio n. You
must enter username information in the database. Use the
username name password global configuration command.
–
local-case—Use a case-sensitive local username database for
authentication. You must enter username information in the
database by using the username password global configuration
command.
–
none—Do not use any authentication for login.
Step4 line [console | tty | vty] line-number
[ending-line-number]Enter line configuration mode, and configure the lines to w hich you want
to apply the authentication list.
Step5 login authentication {default |
list-name}Apply the authentication list to a line or set of lines.
•If you specify default, use the default list created with the aaa
authentication login command.
•For list-name, specify the list created with the aaa authentication
login command.
Step6 end Return to privileged EXEC mode.
Step7 show running-config Verify your entries.
Step8 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose