Cisco Systems 2950 Redundant Power System LED

3-6
Catalyst2950 Desktop Switch Software Configuration Guide
78-11380-05
Chapter3 Getting Started with CMS
Front Panel View
Figure 3-5 shows the port icons as they appear in the front-panel images. To select a port, click the port
on the front-panel image. The port is then highlighted with a yellow outline. To select multiple ports,
you can:
•Press the left mouse button, drag the pointer over the group of ports that you want to select, and t hen
release the mouse button.
•Press the Ctrl key, and click the ports that you want to select.
•Right-click a port, and select Select All Ports from the port popup menu.
Figure3-5 Port Icons
Table 3 -2 describes the colors representing the wavelengths on the CWDM GBIC modules. For port
status LED information, see the “Port Modes and LEDs” section on page 3-7.
Redundant Power System LED
The Redundant Power System (RPS) LED shows the RPS status (Table 3 -3). Certain switches in the
switch cluster use a specific RPS model:
•Cisco RPS 300 (model PWR300-AC-RPS-N1)—Catalyst 2900 LRE XL, Catalyst 2950,
Catalyst 3524-PWRXL , and Catalyst 3550 switches
•Cisco RPS600 (model PWR600-AC-RPS)—Catalyst 2900 XL and Catalyst 3500 XL switches,
except the Catalyst 2900L RE XL and Catalyst 3524-PWR XL switches
Refer to the appropriate switch hardware documentation for RPS descriptions specific for the switch.
Table3-2 Port Icon Colors for the CWDM GBIC Module Ports
Wavelength Color
1470 nanometers (nm) Gray
1490 nm Violet
1510 nm Blue
1530 nm Green
1550 nm Yellow
1570 nm Orange
1590 nm Red
1610 nm Brown