1-2
Catalyst2950 Desktop Switch Software Configuration Guide
78-11380-05
Chapter1 Overview
Features
Performance
•Autosensing of speed on the 10/100 and 10/100/1000 ports and autonegotiation of duplex mode on
the 10/100 ports for optimizing bandwidth
•IEEE 802.3X flow control on Gigabit Ethernet ports operating in fu l l-dup lex mo de
•Fast EtherChannel and Gigabit EtherChannel for enhanced fault tolerance and for providing up
to 2 Gbps of bandwidth between switches, routers, and servers
•Support for frames larger than 1500 bytes. The Catalyst2950G-12-EI, 2950G-24-EI, 2950G-24-EI-DC,
and2950G-48-EI switches running Cisco IOS Release 12.1(6)EA2 or later support frame sizes from
1500 to1530 bytes
•Per-port broadcast storm control for preventing faulty end stations from degrading overall system
performance with broadcast storms
•Port Aggregation Protocol (PAgP) for automatic creation of EtherChannel links
•Internet Group Management Protocol (IGMP) snooping support to limit flooding of IP multicast
traffic
•Multicast VLAN registration (MVR) to continuously send multicast streams in a multicast VLAN
while isolating the streams from subscriber VLANs for bandwidth and security reasons
•IGMP filtering for controlling the set of multicast groups to which hosts on a switch port can belong
•Protected port (private VLAN edge port) option for restricting the forwarding of traffic to designate d
ports on the same switch
•Dynamic address learning for enhanced security
Manageability
•Cisco Intelligence Engine 2100 (IE2100) Series Cisco Networking Ser vices (CN S) em bedd ed
agents for automating switch management, configuration storage and delivery (available only with
the EI)
•Dynamic Host Configuration Protocol (DHCP)-based autoconfiguration for automatically
configuring the switch during startup with IP address information and a configuration file that it
receives during DHCP-based autoconfiguration
Note DHCP replaces the Bootstrap Protocol (BOOTP) feature autoconfiguration to ensure retrieval of
configuration files by unicast TFTP messages. BOOTP is available in earlier softwarereleases
for this switch.
•Address Resolution Protocol (ARP) for identifying a switch through its IP address and its
corresponding MAC address
•Cisco Discovery Protocol (CDP) versions 1 and 2 for network topology discovery and mapping
between the switch and other Cisco devices on the network
•Network Time Protocol (NTP) for providing a consistent timestamp to all switches from an external
source
•Directed unicast requests to a Trivial File Transfer Protocol (TFTP) server for obtaining software
upgrades from a TFTP server
•Default configuration storage in Flash memory to ensure that the switch can be connected to a
network and can forward traffic with minimal user intervention
•In-band management access through a CMS web-based session