Cisco Systems 78-12510-02 manual Initializing the RPM-PR Card

Chapter 5 Configuring the MGX RPM-PR

Booting the RPM-PR

drwxrwxrwx	1	0	0	13312	May	11	15:47 ./
drwxrwxrwx	1	0	0	13312	May	11	17:10 ../
-rwxrwxrwx	1	0	0	2253552	May	11	15:47 mpsm_t1e1_030.000.004.016-P2.fw
-rwxrwxrwx	1	0	0	10655280	Apr	2	08:46 rpm-js-mz.123-2.T5
-rwxrwxrwx	1	0	0	3350304	Apr	2	08:46 rpm-boot-mz.123-2.T5
-rwxrwxrwx	1	0	0	1431512	May	11	15:47 mpsm_t1e1_030.000.004.016-P1_bt.fw
-rwxrwxrwx	1	0	0	1030532	May	11	15:46 frsm_vhs_022.000.005.019-A.fw
-rwxrwxrwx	1	0	0	891552	May	11	15:46 frsm_8t1e1_022.000.005.019-A.fw
-rwxrwxrwx	1	0	0	303936	May	11	15:46 cesm_t3e3_CE8_BT_1.0.02.fw
-rwxrwxrwx	1	0	0	641312	May	11	15:46 cesm_t3e3_022.000.005.019-A.fw
-rwxrwxrwx	1	0	0	743136	May	11	15:46 cesm_8t1e1_022.000.005.019-A.fw
-rwxrwxrwx	1	0	0	826392	May	11	15:38 vxsm_005.000.004.034-A_bt.fw
-rwxrwxrwx	1	0	0	10528336	May	11	15:38 vxsm_005.000.004.034-A.fw
-rwxrwxrwx	1	0	0	7939476	May	11	15:38 pxm45_005.000.004.034-A_mgx.fw
-rwxrwxrwx	1	0	0	1160328	May	11	15:37 pxm45_005.000.004.034-A_bt.fw
-rwxrwxrwx	1	0	0	468388	May	11	15:46 frsm_vhs_VHS_BT_1.0.06.fw
-rwxrwxrwx	1	0	0	1245112	May	11	15:37 mpsm155_005.000.004.034-P1_bt.fw
-rwxrwxrwx	1	0	0	4069552	May	11	15:37 mpsm155_005.000.004.034-P1.fw
-rwxrwxrwx	1	0	0	737896	May	11	15:37 frsm12_005.000.004.034-A_bt.fw
-rwxrwxrwx	1	0	0	2490064	May	11	15:37 frsm12_005.000.004.034-A.fw
-rwxrwxrwx	1	0	0	3674368	May	11	15:36 axsmxg_005.000.004.034-P1.fw
-rwxrwxrwx	1	0	0	838840	May	11	15:36 axsmxg_005.000.004.034-A_bt.fw
-rwxrwxrwx	1	0	0	742168	May	11	15:36 axsme_005.000.004.034-A_bt.fw
-rwxrwxrwx	1	0	0	297988	May	11	15:46 frsm_8t1e1_FR8_BT_1.0.02.fw
-rwxrwxrwx	1	0	0	264592	May	11	15:46 cesm_8t1e1_CE8_BT_1.0.02.fw
-rwxrwxrwx	1	0	0	3111904	May	11	15:36 axsme_005.000.004.034-A.fw
-rwxrwxrwx	1	0	0	744600	May	11	15:36 axsm_005.000.004.034-A_bt.fw
-rwxrwxrwx	1	0	0	3267520	May	11	15:36 axsm_005.000.004.034-A.fw
-rwxrwxrwx	1	0	0	248686	May	11	15:32 vism_8t1e1_VI8_BT_3.2.00.fw
-rwxrwxrwx	1	0	0	4135448	May	11	15:32 vism_8t1e1_003.053.103.007-I.fw
-rwxrwxrwx	1	0	0	4135000	May	11	15:32 vism_8t1e1_003.003.103.007-I.fw
In the file system			:
total	space :		818961 K bytes
free	space :		704028 K bytes

M8850_LA.8.PXM.a >

Initializing the RPM-PR Card

To initialize the RPM-PR card, please refer to the Cisco MGX 8850 (PXM1E/PXM45), MGX 8950, MGX 8830, and MGX 8880 Configuration Guide, Release 5.

To verify the version, enter the show version or show bootvar commands. See the “Verifying the Configuration” section later in this chapter.

Assigning an IP Address to the Switch Interface

You need to assign an IP address for the RPM-PR on the ATM switch. This procedure tells you how to configure the ATM switch interface with the IP address.

Timesaver Obtain the correct IP and ATM network addresses for your RPM-PR on the ATM switch from your system administrator or consult your network plan to determine correct addresses before you continue to configure the RPM-PR.

	Cisco MGX Route Processor Module (RPM-PR) Installation and Configuration Guide
5-4	Release 2.1, Part Number 78-12510-02 Rev. C1, August 31, 2004