If you use AutoAnswer, see Using AutoAnswer with a Headset or Speakerphone, page 55.
Using Wideband with your Headset
If you use a headset that supports wideband, you may experience improved audio sensitivity if you enable the wideband setting on your phone (this setting is disabled by default). To access the setting,
choose 
( 
) > Settings > User Preferences > Audio Preferences > Wideband Headset.
If the Wideband Headset setting shows as dimmed, then this setting is not user controllable.
Check with your system administrator to be sure your phone system is configured to use wideband. If the system is not configured for wideband, you may not detect any additional audio sensitivity even when using a wideband headset. To learn more about your headset, refer to the headset documentation or ask your system administrator for assistance.
Using a Speakerphone
Many of the actions you can take to dial a number or answer a call will trigger speakerphone mode
automatically, assuming that the handset is in its cradle and 
(headset) is not lit.
If you want to... | Then... |
|
|
|
|
Toggle speakerphone mode on | Press | . |
or off |
|
|
|
| |
Switch to a handset | Lift the handset (without pushing any buttons). | |
|
| |
Adjust the volume level for | Press the Volume button during a call or after invoking a dial tone. | |
a call | Press Save to preserve the volume level for future calls. | |
| ||
|
|
|
54 |
|
