Cisco Systems ATA 186 manual Confirming a Successful Signaling Image Upgrade, Using a Web Browser

Chapter 7 Upgrading the Cisco ATA Signaling Image

Confirming a Successful Signaling Image Upgrade

Confirming a Successful Signaling Image Upgrade

You can verify that you have successfully upgraded the Cisco ATA signaling image by using one of the following methods:

•Using a Web Browser, page 7-5

•Using the Voice Configuration Menu, page 7-5

Using a Web Browser

To use your web browser to verify a successful image upgrade, perform the following steps:

Procedure

Step 1 Open your web browser.

Step 2 Enter the IP address of your Cisco ATA Web configuration page:

http://<IP address>/dev

Step 3 Refresh the page to clear the cache.

The image version number and its build date should appear at the bottom-left corner of the Cisco ATA Web configuration page.

Using the Voice Configuration Menu

To use the voice configuration menu to verify a successful image upgrade, perform the following steps:

Procedure

Step 1 Pick up the telephone handset attached to the Phone1 port of the Cisco ATA.

Step 2 Press the function button on the Cisco ATA.

Step 3 Press 123# on the telephone keypad to play out the image version number.

Press 123123# on the telephone keypad to play out the image build date.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 7-5