Cisco Systems ATA 186 DNS2IP, VLAN Setting, Related parameter, 5-11, Description, Value Type

Chapter 5 Parameters and Defaults

Network Configuration Parameters

DNS2IP

Description

This parameter is for setting the secondary domain name server (DNS) IP address, if the DHCP server does not provide one. If DHCP provides DNS2IP (if it is non-zero), this parameter overwrites the DHCP-supplied value. You cannot specify a port parameter. The Cisco ATA uses the default DNS port only.

Value Type

IP address

Default

0.0.0.0

Voice Configuration Menu Access Code

917

VLAN Setting

Description

This parameter is for software versions 2.14.ms, 2.15.ms, and later.

Bitmap definitions are as follows for the VLAN Setting parameter:

•Bits 0-2—Specify VLAN Class of Service (CoS) bit value (802.1P priority) for signaling IP packets.

•Bits 3-5—Specify VLAN CoS bit value (802.1P priority) for voice IP packets.

•Bits 6-17—Reserved.

•Bits 18-29—User-specified 802.1Q VLAN ID.

•Bits 30-31—Reserved.

Value Type

Bitmap

Default

0x0000002b

Voice Configuration Menu Access Code

324

Related parameter

OpFlags, page 5-27

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 5-11