Cisco Systems ATA 186 Network Configuration Parameters, Dhcp, Related Parameters, Description

Chapter 5 Parameters and Defaults

Network Configuration Parameters

Voice Configuration Menu Access Code

Not applicable for this parameter.

Related Parameters

•UseTFTP, page 5-4

•TftpURL, page 5-5

•EncryptKey, page 5-6

Network Configuration Parameters

This section includes the parameters for enabling or disabling the use of a DHCP server to obtain IP address information, and parameters that you need to statically configure if you disable DHCP:

•DHCP, page 5-8

•StaticIp, page 5-9

•StaticRoute, page 5-9

•StaticNetMask, page 5-10

•DNS1IP, page 5-10

•TOS, page 5-29

•VLAN Setting, page 5-11

DHCP

Description

This parameter can be used to automatically set the IP address of the Cisco ATA, the network route IP address, the subnet mask, DNS, NTP, TFTP, and other parameters.

•1—Enable DHCP

•0—Disable DHCP

Value Type

Boolean

Range

0 or 1

Default

1

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

5-8 OL-4803-01