Cisco Systems ATA 186 Complete Reference Table of all Cisco ATA MGCP Services, Caller ID format

Chapter 4 Cisco ATA-Supported MGCP Services

Complete Reference Table of all Cisco ATA MGCP Services

Syntax Type 2

RSIP *@ip_address MGCPVersion

RM: restart

Upon a successful response from the Call Agent to the RSIP command, the Cisco ATA places each MGCP endpoint into the connected state and resumes normal operation. Destinations of subsequent Cisco ATA commands to the Call Agent are set according to the NotifyEntity header. Call Agent responses are always sent to the source address of the origin of the command.

If the Cisco ATA does not receive a Call Agent response to a subsequent command when the maximum number of retransmissions of the command times out, the Cisco ATA puts both Call Agent endpoints back into the disconnected state. The Cisco ATA then sends RSIP messages to the destinations indicated in the NotifyEntity header. This is shown in the following example:

RSIP Message for Disconnect State

RSIP *@ip_address MGCPVersion

RM: disconnected

Complete Reference Table of all Cisco ATA MGCP Services

Table 4-1is a reference table that lists all configurable features for the Cisco ATA (using MGCP), and includes links to the detailed descriptions of the parameters used for configuring these features.

Table 4-1 Configurable Features and Related Parameters for MGCP

Configurable Feature	Related Parameter
Caller ID format	CallerIdMethod, page 5-21
Call waiting	SigTimer, page 5-26
Cisco Discovery Protocol—disabling	OpFlags, page 5-27
Codec—Specify default preferred codec	PrfCodec, page 5-15
Codec names to use in LocalConnectionOption	CodecName, page 5-19
command
Configuration-update interval	CfgInterval, page 5-5
DHCP usage—disabling	DHCP, page 5-8
Debug messages—configuring host	NPrintf, page 5-40
DNS name resolution	OpFlags, page 5-27
Domain name server	DNS1IP, page 5-10
Domain name of endpoint ID	Domain, page 5-18
Dual Tone Multi-frequency (DTMF) method	AudioMode, page 5-20
Encryption	EncryptKey, page 5-6,EncryptKeyEx, page 5-7
Endpoint-identifier specification	EPID0orSID0 and EPID1orSID1, page 5-14
	(Also see the “Endpoints and Connections”
	section on page 4-3.)
Fax CED tone detection	AudioMode, page 5-20
Fax CNG tone detection

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 4-5