Cisco Systems ATA 186 manual TftpURL, UseTFTP, page CfgInterval, page, Description, Value Type

Chapter 5 Parameters and Defaults

Parameters for Configuration Method and Encryption

TftpURL

Description

Use this parameter to specify the IP address or URL of the TFTP server. This string is needed if the DHCP server does not provide the TFTP server IP address. When the TftpURL parameter is set to a non-zero value, this parameter has priority over the TFTP server IP address supplied by the DHCP server.

Optionally, you can include the path prefix on the TFTP server from which the Cisco ATA will download its configuration file.

For example, if the TFTP server IP address is 192.168.2.170 or www.cisco.com, and the path prefix for the configuration file on the TFTP server is in /ata186, you can specify the URL as 192.168.2.170/ata186 or www.cisco.com/ata186.

Note From the voice configuration menu, you can only enter the IP address; from the Web configuration page, you can enter the actual URL.

Value Type

Alphanumeric string

Range

Maximum 31 characters

Default

0

Voice Configuration Menu Access Code

905

Related Parameters

•UseTFTP, page 5-4

•CfgInterval, page 5-5

CfgInterval

Description

Use this parameter to specify the number of seconds between each configuration update. The Cisco ATA will also upgrade its signaling image it it detects that the TFTP server contains an upgraded image.

When using TFTP for configuration, the Cisco ATA contacts TFTP each time the interval expires to get its configuration file.

You can set CfgInterval to a random value to achieve random contact intervals from the Cisco ATA to the TFTP server.

Value Type

Decimal

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 5-5