Cisco Systems ATA 186 Basic Configuration Steps in a Non-TFTP Server Environment, Menu, page

Chapter 3 Configuring the Cisco ATA for MGCP

Steps Needed to Configure the Cisco ATA

Basic Configuration Steps in a Non-TFTP Server Environment

Table 3-4shows the basic steps for configuring the Cisco ATA without using the TFTP server method.

Table 3-4 Basic Steps to Configure the Cisco ATA Without Using the TFTP Server Method

Action Reference

1.Download the desired Cisco ATA release software zip file from the Cisco web site:

a.If you are a registered CCO user. go to the following URL: http://www.cisco.com/cgi-bin/tablebuild.pl/ata186

b.Download the zip file that contains the software for the applicable release and signaling image you are using. The contents of each file are described next to the file name.

c.Extract the files to the desired location on your PC.

	Note The file that contains the protocol signaling image has an extension of .zup.
2.	Manually upgrade the Cisco ATA to the correct signaling image.	Upgrading the Signaling
		Image Manually, page 7-2
3.	Configure the Cisco ATA by using either one of the manual-configuration methods.	•	Voice Configuration
			Menu, page 3-20
		•	Cisco ATA Web
			Configuration Page,
			page 3-23

4.Power up the Cisco ATA.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 3-7