Cisco Systems ATA 186 CA1UID, EPID0orSID0 and EPID1orSID1, Value Types, 5-14, Description, Range

Chapter 5 Parameters and Defaults

MGCP Configuration Parameters

CA1UID

Description

Specify the ID of the secondary Call Agent in this parameter.

Value Type

Alphanumeric string

Range

Maximum 31 characters

EPID0orSID0 and EPID1orSID1

Description

EPIDx (for MGCP only) specifies the alphanumeric Endpoint Identifier assigned to line x of the Cisco ATA, where x=0 or 1. The complete Endpoint Identifier sent to the Call Agent has the format <EPIDx>@<ip_addr>. (SIDx does not apply to MGCP.) To enable the usage of square brackets around the IP address of the endpoint, enable Bit 20 of the ConnectMode parameter. (See the “ConnectMode” section on page 5-24.)

Note Setting the EPID0orSID0 or EPID1orSID1 parameter to 0 does not disable the respective line.

Value Types

Alphanumeric string for each parameter

Default

.—The dot is the default and means that the value of aaln/1 is used as the MGCP endpoint ID for EPID1 and aaln/2 is used as the MGCP endpoint name for EPID2.

Range

Maximum 51 characters for each parameter

Voice Configuration Menu Access Codes

46 and 47 for EPID0orSID0 and EPID1orSID1, respectively

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

5-14 OL-4803-01