Cisco Systems Cisco 3600 manual Installing the Router

C H A P T E R 3

Installing the Router

This chapter describes how to install your Cisco 3600 series router and connect it to networks and external devices. It contains the following sections:

•Installing Modules, Interface Cards, and Power Supplies, page 3-2

•Installing the Chassis, page 3-3

•Installing Chassis Ground Connection, page 3-19

•Power Connections, page 3-27

•Connecting WAN, LAN, and Voice Cables, page 3-37

•Connecting to a Console Terminal or Modem, page 3-43

•Powering Up the Router, page 3-51

•Configuring the Router, page 3-53

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017

Note See the “Tools and Equipment for Installation and Maintenance” section on page 2-8for a list of tools and equipment that might be required for your installation.

Cisco 3600 Series Routers Hardware Installation Guide

OL-2056-05 3-1