Chapter 1 Overview of Cisco 3600 Series Routers

Interface Numbering

Voice Interface Numbering

Voice interfaces are numbered as follows:

interface-type chassis-slot/voice-module-slot/voice-interface

For example, Slot 1, voice network module slot 0, is referred to as voice 1/0/0 (closest to chassis slot 0).

Cisco 3631 Interfaces

Each individual interface (port) on a Cisco 3631 router is identified by number as described in the following sections.

WAN and LAN Interface Numbering

The Cisco 3631 router chassis contains the following WAN and LAN interface types:

One built-in FastEthernet LAN interface

Two slots in which you can install WAN interface cards (WICs)

Two single-width slots (slot 1 and slot 2) in which you can install single-width network modules The numbering format is Interface-typeSlot-number/Interface-number. Two examples are:

FastEthernet 0/0

Serial 1/2

The slot numbers are as follows:

0 for all built-in interfaces

0 for all WIC interfaces

1 for interfaces in the lower network module slot

2 for interfaces in the upper network module slot

Interface (port) numbers begin at 0 for each interface type, and continue from right to left and (if necessary) from bottom to top.

Figure 1-8shows an example of interface numbering on a Cisco 3631 router with:

A WIC in each WIC slot (containing interfaces serial 0/0 and serial 0/1 in physical slot W0, and interface serial 0/2 in physical slot W1)

A 32-port asynchronous network module in slot 1 (containing interfaces serial 1/0 through serial 1/31)

An alarm interface controller network module in slot 2 (internally connected to interface serial 2/0)

One built-in Ethernet 10/100 interface—FastEthernet 0/0

Cisco 3600 Series Routers Hardware Installation Guide

 

OL-2056-05

1-9

 

 

 

Page 29
Image 29
Cisco Systems Cisco 3600 manual Cisco 3631 Interfaces, Voice Interface Numbering, WAN and LAN Interface Numbering