Cisco Systems Cisco IOS XR manual Verifying the System After Initial Bring-Up, Example

Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router

Verifying the System After Initial Bring-Up

User Access Verification

Username: cisco

Password:

RP/0/0/CPU0:ios#

The secret line in the configuration command script shows that the password is encrypted. When you enter the password during configuration and login, the password is hidden.

Verifying the System After Initial Bring-Up

To verify the status of the router, perform the following procedure:

SUMMARY STEPS

1.show version

2.admin

show platform [node-id]end

3.show redundancy

4.show environment

DETAILED STEPS

	Command or Action	Purpose
Step 1
	show version	Displays information about the router, including image names,
		uptime, and other system information.
	Example:
	RP/0/RP0/CPU0:router# show version
Step 2
	admin	Places the router in administration EXEC mode, displays
	show platform [node-id]	information about the status of cards and modules installed in
	exit	the router, and terminates administration EXEC mode.
	Example:	• Some cards support a CPU module and service processor
		(SP) module. Other cards support only a single module.
	RP/0/RP0/CPU0:router# admin
		• A card module is also called a node. When a node is
	RP/0/RP0/CPU0:router(admin)# show platform
	RP/0/RP0/CPU0:router(admin)# exit	working properly, the status of the node in the State column
		is IOS XR RUN.
		• Type the show platform node-idcommand to display
		information for a specific node. Replace node-idwith a
		node name from the show platform command Node
		column.
		Note To view the status of all cards and modules, the show
		platform command must be executed in administration
		EXEC mode.

Cisco IOS XR Getting Started Guide

2-4 OL-10957-02