Cisco Systems Cisco IOS XR manual Examples of show Commands, Show version Command

Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router

Verifying the System After Initial Bring-Up

	Command or Action	Purpose
Step 3
	show redundancy	Displays the state of the primary (active) and standby (inactive)
		RPs, including the ability of the standby to take control of the
	Example:	system.
	RP/0/RP0/CPU0:router# show redundancy	• If both RPs are working correctly, one node displays active
		role, the Partner node row displays standby role, and the
		Standby node row displays Ready.
Step 4
	show environment	Displays information about the hardware attributes and status.
	Example:
	RP/0/RP0/CPU0:router# show environment

Examples of show Commands

The following sections provide examples of show commands:

•show version Command, page 2-5

•show environment Command, page 2-6

•show platform Command, page 2-7

•show redundancy Command, page 2-8

show version Command

To display basic information about the router configuration, type the show version command in EXEC mode, as shown in the following example:

RP/0/RP0/CPU0:router# show version

Cisco IOS XR Software, Version 3.3.0[2I]

Copyright (c) 2006 by cisco Systems, Inc.

ROM: System Bootstrap, Version 1.38(20050525:193559) [CRS-1 ROMMON],

CRS-8_P1 uptime is 1 week, 1 day, 17 hours, 1 minute

System image file is "disk0:hfr-os-mbi-3.3.0/mbihfr-rp.vm"

cisco CRS-8/S (7457) processor with 4194304K bytes of memory. 7457 processor at 1197Mhz, Revision 1.2

16 Packet over SONET/SDH network interface(s)

16 SONET/SDH Port controller(s)

2 Ethernet/IEEE 802.3 interface(s)

16 GigabitEthernet/IEEE 802.3 interface(s)

2043k bytes of non-volatile configuration memory.

38079M bytes of hard disk.

1000592k bytes of ATA PCMCIA card at disk 0 (Sector size 512 bytes). 1000640k bytes of ATA PCMCIA card at disk 1 (Sector size 512 bytes).

Package active on node 0/1/SP:

hfr-diags, V 3.3.0[2I], Cisco Systems, at disk0:hfr-diags-3.3.0

Built on	Mon Mar 13	12:58:02 UTC 2006
By iox8.cisco.com in /auto/ioxws48/production/3.3.0.2I/hfr/workspace for c8
hfr-admin, V	3.3.0[2I],	Cisco Systems, at disk0:hfr-admin-3.3.0
Built on	Mon Mar 13	11:46:36 UTC 2006
By iox8.cisco.com in /auto/ioxws48/production/3.3.0.2I/hfr/workspace for c8
		Cisco IOS XR Getting Started Guide
OL-10957-02			2-5