Chapter 3 Bringing Up the Cisco IOS XR Software on a Multishelf System

Configuring the External Cisco Catalyst 6509 Switches

no ip http server

!

!

!

!

!

line con 0

line vty 0 4 login

!

End

Verifying the Catalyst Switch

As each rack in the multishelf system is brought up, verify that the Catalyst switch links are operating correctly by completing the tasks in the following sections:

Verify the Interface Status, page 3-18

Verify Communication Between the Catalyst Switch and an LCC or FCC, page 3-18

Verify that the Links are Not Unidirectional, page 3-19

Verify the Interface Status

To verify that the interfaces are connected, enter the command show interfaces status. Enter the command on a terminal connected to each Catalyst switch.

CAT6k-1#show interfaces status

Port Name Status Vlan Duplex Speed Type

Gi1/1 connected 1 full 1000 1000BaseLH

Gi1/2 connected 1 full 1000 1000BaseLH

Gi1/3 connected 1 full 1000 1000BaseLH

Gi1/4 connected 1 full 1000 1000BaseLH

Gi1/5 connected 1 full 1000 1000BaseLH

Gi1/6 connected 1 full 1000 1000BaseLH

Gi1/7 disabled 1 full 1000 1000BaseSX

Gi1/8 disabled 1 full 1000 1000BaseSX

Gi1/9 disabled 1 full 1000 1000BaseSX

Gi1/10 disabled 1 full 1000 1000BaseSX

Gi1/11 disabled 1 full 1000 1000BaseSX

Gi1/12 disabled 1 full 1000 1000BaseSX

Gi1/13 disabled 1 full 1000 1000BaseSX

Gi1/14 disabled 1 full 1000 1000BaseSX

Gi1/15 disabled 1 full 1000 1000BaseSX

Gi1/16 disabled 1 full 1000 1000BaseSX

Gi5/1 disabled 1 full 1000 1000BaseSX

Gi5/2 connected routed a-full a-100 10/100/1000BaseT

CAT6k-1#

Verify Communication Between the Catalyst Switch and an LCC or FCC

To verify that the Catalyst switch is communicating with an LCC or FCC in forwarding mode, enter the command show spanning tree.

This command displays the states of the spanning tree ports. Verify that the ports used to connect the DSC, remote LCC RP, and FCC SCGE are in the FWDG state.

 

Cisco IOS XR Getting Started Guide

3-18

OL-10957-02

Page 56
Image 56
Cisco Systems Cisco IOS XR Verifying the Catalyst Switch, Verify the Interface Status, CAT6k-1#show interfaces status