Cisco Systems Cisco IOS XR manual Restrictions

Contents

	Connecting to the Router Through the Console Port							1-9
	Where to Go Next			1-14
	Bringing Up the Cisco IOS XR Software on a Standalone Router
C H A P T E R 2										2-1
	Contents	2-1
	Prerequisites		2-1
	Software Requirements					2-1
	Hardware Prerequisites and Documentation							2-2
	Bringing Up and Configuring a Standalone Router							2-2
	Verifying the System After Initial Bring-Up2-4
	Where to Go Next			2-8
	Bringing Up the Cisco IOS XR Software on a Multishelf System
C H A P T E R 3										3-1
	Contents	3-1
	Prerequisites		3-1
	Software Requirements					3-1
	Hardware Requirements					3-2
	Restrictions		3-2
	Information About Bringing Up a Multishelf System							3-3
	Bringup Overview				3-3
	Preparing a Rack Number Plan						3-3
	Configuring the External Cisco Catalyst 6509 Switches								3-8
	Prerequisites			3-9
	Restrictions			3-10
	Before You Begin				3-10
	Information About the Catalyst Switch Configuration								3-11
	Configuring the Catalyst Switches 3-11
	Verifying the Catalyst Switch						3-18
	Integrated Switch System 3-20
	Prerequisites for an Integrated Switch System							3-20
	Restrictions for an Integrated Switch System							3-21
	Before You Begin				3-21
	Information About the Integrated Switch Implementation 3-21
	Implementing the Integrated Switch System							3-23
	Verifying the Connections of the Integrated Switch Control Network 3-25
	Bringing Up and Configuring Rack 0						3-28
	Bringing Up and Verifying FCCs					3-34

	Bringing Up and Verifying the Non-DSC LCC	3-37
	Cisco IOS XR Getting Started Guide
iv		OL-10957-02