Cisco Systems Cisco IOS XR manual Maximum Routes Redistributed into Ospf

Chapter 5 Configuring Additional Router Features

Configuration Limiting

Minimum hold time for LSA throttle 5000 msecs

Maximum wait time for LSA throttle 5000 msecs

Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs

Maximum number of configured interfaces 255

--More--

The following example configures the maximum interface limit on a router:

RP/0/RP1/CPU0:router# configure

RP/0/RP1/CPU0:router(config)# router ospf 100

RP/0/RP1/CPU0:router(config-router)# maximum interfaces 600

RP/0/RP1/CPU0:router(config-router)# end

Uncommitted changes found, commit them? [yes]: y

RP/0/RP1/CPU0:Mar 30 16:12:39 : config[65740]: %LIBTARCFG-6-COMMIT : Configurati

on committed by user 'cisco'. Use 'show configuration commit changes 1000000540' to view the c

hanges.

RP/0/RP1/CPU0:Mar 30 16:12:39 : config[65740]: %SYS-5-CONFIG_I : Configured from console by cisco

RP/0/RP1/CPU0:router# show ospf

Routing Process "ospf 100" with ID 0.0.0.0

Supports only single TOS(TOS0) routes

Supports opaque LSA

It is an area border router

Initial SPF schedule delay 5000 msecs

Minimum hold time between two consecutive SPFs 10000 msecs

Maximum wait time between two consecutive SPFs 10000 msecs

Initial LSA throttle delay 500 msecs

Minimum hold time for LSA throttle 5000 msecs Maximum wait time for LSA throttle 5000 msecs

Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs Maximum number of configured interfaces 600

--More--

Maximum Routes Redistributed into OSPF

In the following example, the maximum redistributed-prefixescommand is used to set the maximum routes redistributed into OSPF:

RP/0/RP1/CPU0:router# configure

RP/0/RP1/CPU0:router(config)# router ospf 100

RP/0/RP1/CPU0:router(config-router)# maximum redistributed-prefixes 12000

RP/0/RP1/CPU0:router(config-router)# end

Uncommitted changes found, commit them? [yes]: y

RP/0/RP1/CPU0:Mar 30 16:26:52 : config[65740]: %LIBTARCFG-6-COMMIT : Configurati

on committed by user 'cisco'. Use 'show configuration commit changes 1000000541' to view the changes.

RP/0/RP1/CPU0:Mar 30 16:26:52 : config[65740]: %SYS-5-CONFIG_I : Configured from console by cisco

RP/0/RP1/CPU0:router#

Number of Parallel Links (max-paths)

In the following example, the maximum paths command is used to set the maximum number of parallel routes:

RP/0/RP1/CPU0:router# configure

RP/0/RP1/CPU0:router(config)# router ospf 100

RP/0/RP1/CPU0:router(config-router)# maximum paths 10

	Cisco IOS XR Getting Started Guide
OL-10957-02		5-19