Cisco Systems Cisco IOS XR manual Show platform Command

Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router

Verifying the System After Initial Bring-Up

0/1/*: Module (host) LED status says: OK

0/1/*: Module (jacket) LED status says: OK

0/1/*: Module (spa0) LED status says: OK

0/1/*: Module (spa5) LED status says: OK

0/6/*: Module (host) LED status says: OK

0/6/*: Module (jacket) LED status says: OK

0/6/*: Module (spa0) LED status says: OK

0/6/*: Module (spa4) LED status says: OK

0/6/*: Module (spa5) LED status says: OK

0/RP0/*: Module (host) LED status says: OK

0/RP0/*: Alarm LED status says: NONE

0/RP1/*: Module (host) LED status says: OK

0/RP1/*: Alarm LED status says: NONE

See the Cisco IOS XR Interface and Hardware Component Command Reference for more information.

show platform Command

The show platform command displays information on router resources. In EXEC mode, the show platform command displays the resources assigned to the secure domain router (SDR) you are managing. In administration EXEC mode, the show platform command displays all router resources.

Note SDRs are introduced in Chapter 4, “Configuring General Router Features.”

The following EXEC mode sample output displays the nodes assigned to the default SDR, which is called the owner SDR:

RP/0/RP0/CPU0:router# show platform

NodeTypePLIMStateConfig State

-----------------------------------------------------------------------------

0/1/CPU0	MSC	Jacket Card	IOS XR RUN	PWR,NSHUT,MON
0/1/0	MSC(SPA)	4XOC3-POS	OK	PWR,NSHUT,MON
0/1/5	MSC(SPA)	8X1GE	OK	PWR,NSHUT,MON
0/6/CPU0	MSC	Jacket Card	IOS XR RUN	PWR,NSHUT,MON
0/6/0	MSC(SPA)	4XOC3-POS	OK	PWR,NSHUT,MON
0/6/4	MSC(SPA)	8XOC3/OC12-POS	OK	PWR,NSHUT,MON
0/6/5	MSC(SPA)	8X1GE	OK	PWR,NSHUT,MON
0/RP0/CPU0	RP(Active)	N/A	IOS XR RUN	PWR,NSHUT,MON
0/RP1/CPU0	RP(Standby)	N/A	IOS XR RUN	PWR,NSHUT,MON

The following administration EXEC mode sample output displays all router nodes:

RP/0/RP0/CPU0:router# admin

RP/0/RP0/CPU0:router(admin)# show platform

	Node	Type	PLIM	State	Config State
-----------------------------------------------------------------------------
	0/1/SP	MSC(SP)	N/A	IOS XR RUN	PWR,NSHUT,MON
	0/1/CPU0	MSC	Jacket Card	IOS XR RUN	PWR,NSHUT,MON
0/1/0		MSC(SPA)	4XOC3-POS	OK	PWR,NSHUT,MON
0/1/5		MSC(SPA)	8X1GE	OK	PWR,NSHUT,MON
	0/6/SP	MSC(SP)	N/A	IOS XR RUN	PWR,NSHUT,MON
	0/6/CPU0	MSC	Jacket Card	IOS XR RUN	PWR,NSHUT,MON
0/6/0		MSC(SPA)	4XOC3-POS	OK	PWR,NSHUT,MON
0/6/4		MSC(SPA)	8XOC3/OC12-POS	OK	PWR,NSHUT,MON
0/6/5		MSC(SPA)	8X1GE	OK	PWR,NSHUT,MON
	0/RP0/CPU0	RP(Active)	N/A	IOS XR RUN	PWR,NSHUT,MON
	0/RP1/CPU0	RP(Standby)	N/A	IOS XR RUN	PWR,NSHUT,MON
	0/SM0/SP	FC/S(SP)	N/A	IOS XR RUN	PWR,NSHUT,MON
	0/SM1/SP	FC/S(SP)	N/A	IOS XR RUN	PWR,NSHUT,MON
				Cisco IOS XR Getting Started Guide
	OL-10957-02					2-7