Cisco Systems Cisco IOS XR manual Show environment Command, Show environment options

Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router

Verifying the System After Initial Bring-Up

hfr-base, V 3.3.0[2I], Cisco Systems, at disk0:hfr-base-3.3.0 Built on Mon Mar 13 11:43:22 UTC 2006

By iox8.cisco.com in /auto/ioxws48/production/3.3.0.2I/hfr/workspace for c8

hfr-os-mbi, V 3.3.0[2I], Cisco Systems, at disk0:hfr-os-mbi-3.3.0 Built on Mon Mar 13 11:27:02 UTC 2006

By iox8.cisco.com in /auto/ioxws48/production/3.3.0.2I/hfr/workspace for c8

--More--

show environment Command

To display environmental monitor parameters for the system, use the show environment command in EXEC or administration EXEC mode. The following command syntax is used:

show environment [options]

Enter the show environment ? command to display the command options.

In the following example, temperature information for a Cisco CRS-1 router is shown:

RP/0/RP0/CPU0:router# show environment temperatures

R/S/I	Modules	Inlet	Exhaust	Hotspot
		Temperature	Temperature	Temperature
		(deg C)	(deg C)	(deg C)
0/1/*
	host	32, 30	26, 27	35
	cpu			34
	fabricq0			27
	fabricq1			32
	ingressq			37
	egressq		32	27
	ingresspse			35
	egresspse			29
	jacket	25	24	25
	spa0	19		25, 32
	spa5	25		24
0/6/*
	host	32, 26	27, 25	33
	cpu			35
	fabricq0			27
	fabricq1			32
	ingressq			37
	egressq		30	25
	ingresspse			31
	egresspse			29
	jacket	24	25	26
	spa0	19		25, 31
	spa4	22		33, 35
	spa5	24		24
0/RP0/*
	host	23	24	24, 33, 26,
				24, 27
0/RP1/*
	host	23	24	24, 32, 26,
				24, 26

In the following example, LED status of the nodes in a Cisco CRS-1 router is shown:

RP/0/RP0/CPU0:router# show environment leds

Cisco IOS XR Getting Started Guide

2-6 OL-10957-02