Output Flow Control (Xmit) - Xon/Xoff is ( Off )
Stop/Restart Output Upon Receiving of Xoff/Xon ? (Y/N) :
Input Flow Control (Recv) - Xon/Xoff is ( Off )
Xoff/Xon sent based on Buffer - Full/Empty condition ? (Y/N) :
RTS/DTR Line Driver Inactivity State
RTS (Request to Send)/ DTR (Data Terminal Ready) is normally used in conjunction with an external modem. With no modem the RTS and DTS default state is High.
Select “RTS Driver State” the DS displays the following:
RTS Line Driver Inactive State is: High
High ? (Y/N, CR for no change):
Select “DTR Driver State” the DS displays the following:
DTR Line Driver Inactive State is: High
High ? (Y/N, CR for no change):
Port Device Name
Select a port and type the new name:
Enter New Port | Name (Max. 16 | characters): |
or press ENTER | for no change | ................: |
Port Select Code
The Port Select Code is an ASCII character string sent by the host terminal to the module to select an I/O port on a DS74 peripheral module. The Port Select Code’s factory default setting is $BT and is programmable up to 8 characters as shown.
Port Select Code :$BT
Change It ? (Y/N) :
Attention Character
Pressing the Attention Character 5 consecutive times will access the network main menu. The Default is a
Attention Character :;
Change It ? (Y/N) :
NOTE: If you change the attention character and forget which letter or symbol you selected, the attention character will not echo if you are typing the correct character. You can type each character/symbol on the keyboard to find it, or reset the module to factory default to get the
18
