Header
If enabled, the following header appears with the main menu upon initialization of power or after a modem connection to the host module has been established. If disabled, the header does not appear with the main menu. Default Header is enabled.
Header Text :Enabled
Enable ? (Y/N, CR for no change):
Access Control
This feature configures the Serial and Modem port access by enabling the module to prompt for user name and password. Default for both is disabled.
Access Control: Serial Port access:
1)...Prompt for User Name: Disabled
2)...Prompt for Password : Disabled Modem Port access:
3)...Prompt for User Name: Disabled
4)...Prompt for Password : Disabled Enter Select :
CAUTION: Before you enable the password for either Serial Port or Network access, verify the admin password is known, or you could create a lockout condition. If the password lockout condition occurs, you will need to reset the
The host module confirms the option you selected to change.
Enable prompt for network user name? (Y/N)>y
Menu
This allows the admin to enable or disable the Menu on start up. If disabled, the header appears upon login without the main menu. To invoke the main menu when disabled, enter the attention character five times (;;;;;).
Menu Mode :Enabled
Enable ? (Y/N, CR for no change):
The default user and password is “admin/baytech”, all lower case.
Manage Users
This option allows the administrator to change user passwords or add/delete new users. Up to 19 users plus an administrator allowed. Usernames are case sensitive and alphanumeric.
NOTE: The “admin” can not be deleted.
20