Disconnect Timeguard
This feature ensures reliable binary data transmission by providing a
The Default setting is Disabled.
Disconnect Time Guard :Disabled
Enable ? (Y/N, CR for no change):
Connect port ID Echo
When a user logs into the DS unit the port is identified in the following example:
BAYTECH
For further information check:
http://www.baytech.net/
DS71MD4 | <= | Device | name Port echo. |
|
or | <= |
|
|
|
02,1 | Module | and Port Number | echo. |
Select option 1, to disable the echo. The Default setting is Disabled.
Select option 2 to echo the module and port number. (i.e. 3,2)
Select option 3 to echo the device name. (Device A)
Disable Port ID Echo | 1 |
Use Module, Port Number | 2 |
Use Port Name | 3 |
Login Setup
This menu allows the user to enable or disable the Header, Access Control, Menu, Manage Users, Auto Connect, Dial Back Number, and Assign User Ports.
Login Setup: | 1 |
|
Header | Enable/Disable header for each menu | |
Access Control | 2 | Enable/Disable Network/Serial port user name |
Menu | 3 | and password. |
Enable menu on startup or 5 attention Char. | ||
Manage Users | 4 | Add/Delete users and change passwords. |
Auto Connect | 5 | Auto connect to module and port on |
|
| Has priority over setup menu, Disables the |
Dial Back Number | 6 | menu selection screen on initial login. |
Have the modem to dial back the user | ||
Assign User Ports | 7 | Assign users to specific ports |
Exit | X,CR | Returns to previous menu |
Enter Request : |
|
|
|
|
|
19