Cisco Systems DS Series manual Detailed Operation and Configuration, DS71-MD4 Main Menu

DS71-MD4 Serial host and 56k Modem

Detailed Operation and Configuration

DS71-MD4 Main Menu

The menu may vary according to the number of DS74 modules installed in the unit. With a proper connection to the unit upon power-up or unit reset, the following menu is displayed:

Module 2: admin	on Host EIA-232
Device A	(2,1)	.........1
Device B	(2,2)	.........2
Device C	(2,3)	.........3
Device D	(2,4)	.........4
DS-RPC	(5,1)	.........5
Configuration		C	Module setup
I/O Modules Reset	............	RM	Reset all I/O ports
Unit Reset		RU	Resets DS-unit. All internal and external
Exit		X	communications are lost
			Access to additional menu options
Logout		T	Logout the user
Enter Request :c

NOTE: Only the Admin user will see the Configuration, Unit Reset, and I/O Module Reset options. All users will see only the ports assigned to them, alone with ‘Exit’ and ‘Logout’.

Configuration Menu

The configuration menu allows the admin user to choose a module to access and edit its configuration. The following pages define each line of the configuration menu. Changes take effect immediately.

Module Configuration		1
DS71-MD4	(2)		Host Module
DS74	(3)	2	I/O EIA232 ports
DS-RPC	(5)	3	Assign users, outlet name, Enable/Disable
Exit		X,CR	confirmation/status menu, unit id, alarm set
Enter Request :

Host Module Configuration

Enter the number that corresponds with the Host Module followed by a <cr> and the Host Module responds without the option description:

13