Cisco Systems DS Series Auto Connect, Dial-Back Number, DS71-MD4 Serial host and 56k Modem

DS71-MD4 Serial host and 56k Modem

Auto Connect

This feature allows the admin to select the module and port that the user will be automatically connected on dial-in. The auto connect port has priority over the login setup menu enable/disable selection, thus prevent the menu selection screen from appearing at the initial login sequence.

+	----+------------	Name	+------	+----------	+
User			M: P Auto
+	----+------------		+------	+----------	+
	1 admin		1: 1 Disabled
+	----+------------		+------	+----------	+

Dial-in	Auto Connect Port	1
Enabled/Disable		2
Exit	:1	X,CR
Enter Request

Select 1) to assign module and port.

Enter Auto Connect Module (1 to 9): 2

Enter Auto Connect Port (1 to 4):4

Select 2) to turn on or off the Auto Connect feature

Enable ? (Y/N, CR for no change):

Dial-Back Number

This feature allows user to dial in, hang up and the unit dials the assigned number back when using a secure phone line. Select a user number and the module displays the following:

User Dialback Phone number
Dialback Delay:10 seconds				+	+
+	----+	-----------Name	+-----------------
User			Phone number	Dialback
+	----+	-----------	+-----------------	+----------	+
	1 admin			Disabled
+	----+	-----------	+-----------------	+----------	+

Phone number	1
Dialback option	2
Dialback Delay	3
Exit	X,CR

Select “Phone number” option to enter a phone number assigned to the user.

Dial back Phone number is .............

Enter new Phone number (<= 15 digits):

Select “Dialback” option to enable or disable the dial back feature. Default is Disabled.

Dial back option is	Disabled
Enable ? (Y/N, CR for no change):

22