Cisco Systems DS71-MD4, DS Series manual Local Modem Option, Remove All Ports

DS71-MD4 Serial host and 56k Modem

Select this option to add all ports to the user. The module displays the user with all ports added.

Assigned User Ports:
+	----+	----------Name	* +-M3-+-M4-+-M5-+
User			\123412341234
+	----+	------------	*----	+----	+	----+
	2 johnt		123412341234
+	----+	------------	*----	+----	+	----+

Remove All Ports

Select this option and the module displays the user with all ports deleted.

Assigned User Ports:
+	----+	----------Name	* +-M3-+-M4-+-M5-+
User			\123412341234
+	----+	------------	*----	+----	+	----+
	2 johnt		....	....		....
+	----+	------------	*----	+----	+	----+

Local Modem Option

Local Modem Option:	1
Rings to Answer
Connectivity Timeout	2
Inactivity Timeout	3
Exit	X,CR

Enter Request :1

Ring to Answer

Select “Rings to Auto Answer” to set the number of rings before the unit answers. The module displays the following: The default setting is 2.

Rings to Auto Answer: 2

Enter number (1-4):

Connectivity Timeout

Select the Connectivity Timeout option to set the continuous connectivity time (5 to 255 minutes) before the modem automatically disconnects. Entering a time of 0 disables the Connectivity Timeout. The timer starts when the modem answers (DCD goes high). The modem will disconnect, regardless of activity, when time runs out. Default setting is 60 minutes. The module displays the following:

Modem Connectivity Timeout:60 minutes

Change It ? (Y/N) :

Inactivity Timeout

This option sets the time the modem will automatically disconnect, if there is no activity equaling the programmed amount of time (1 to 120 minutes). Default setting is 0 (disabled).

Select Inactivity Timeout and the module display the following:

24