User Management Menu: |
|
”admin” | 1 |
Add New User | A |
Delete User | D |
Change User | C |
To change user password, enter number of user
Enter Request :1
Change User’s Password
NOTE: The factory default password for “admin” is <cr> (Enter).
The admin can change a current user’s port access and password. Select the number of the user from the User Management Menu and the Host Module displays the following:
Selected user: admin
Enter New Password:
Clear Password (Y/N) ?:n
ADD User
Select A), from the User Management Menu and the Host Module responds with a request for the user name.
Enter User Name (maximum 10 characters):
Enter the name of the user to be added, followed by <cr>. The Host Module will display the User Menu with the added user.
NOTE: User name is case sensitive.
Delete User
Select D), from the User Management Menu. The Host Module will display the following:
From menu above, enter number for User to delete:
If you select the “admin” user the Module responds with an input error message:
Input error: deletion of admin user not allowed.
From menu above, enter number for user to delete>
Type the number of the user to be deleted and press <cr>. A successful deletion the Module responds with User Menu minus the deleted user.
Change User
Select C) from the User Management Menu and type the number of the user to edit
From menu above, enter number for user to edit:2
Selected user: CAD Eng
Enter new User Name(maximum 10 characters): Engineer
Change username from "CAD Eng" to "Engineer" (Y/N) ?:
21