Modem Inactivity Timeout:60 minutes
Change It ? (Y/N) :
Unit ID
This option allows the admin users to change the Host Module’s name.
Unit
Change It ? (Y/N) :Y
Enter Unit ID (63 chars. max.) :
Enter the desired Unit ID, followed by <cr.> The
I/O modules Reset
Select “I/O Modules Reset” followed by <cr>. The module resets the communications to all I/O ports on all peripheral modules and displays:
I/O Modules Reset Successfully
Strike any Key to Continue
If other users are connected it will ask you to override the users.
Other User Connected, Override ? (Y/N, Enter): y
I/O Modules Reset Successfully
Strike any Key to Continue
Unit Reset
IMPORTANT: Unit reset terminates both internal and external modem connections.
NOTE: You must be connected to the
Select “Reset Unit” followed by <cr>. The module resets the unit and displays:
Reset the unit (Y/N) ?:y
Allow approximately 10 seconds for the unit to reset. It should state something similar to:
Initializing System Please Wait ...........
Troubleshooting:
Functional Solutions:
1.No menu serial port:
a. DS power is on and cable connected to EIA232 serial port.
25