Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems DSC9148D8G48PK9 manual Information About Fibre Channel Interfaces

Models: DSC9148D8G48PK9

1 236

Download 236 pages 33.59 Kb

Page 79

C H A P T E R 3

Configuring Fibre Channel Interfaces

•Information About Fibre Channel Interfaces, page 3-1

•Guidelines and Limitations, page 3-18

•Default Settings, page 3-25

•Configuring Fibre Channel Interfaces, page 3-26

•Verifying Fibre Channel Interfaces Configuration, page 3-43

•Configuration Examples for Fibre Channel Interfaces, page 3-45

Information About Fibre Channel Interfaces

This section includes the following topics:

•Generations of Modules and Switches, page 3-1

•Port Groups, page 3-3

•Port Rate Modes, page 3-5

•Port Speed, page 3-10

•Dynamic Bandwidth Management, page 3-10

•Out-of-Service Interfaces, page 3-11

•Oversubscription Ratio Restrictions, page 3-11

•Bandwidth Fairness, page 3-17

Generations of Modules and Switches

Cisco MDS 9000 Family hardware modules and switches are categorized into generations based on the time of introduction, capabilities, features, and compatibilities:

•Generation 1—Modules and switches with a maximum port speed of 2 Gbps.

•Generation 2—Modules and switches with a maximum port speed of 4 Gbps.

•Generation 3—Modules and switches with a maximum port speed of 8 Gbps.

•Generation 4—Modules with a maximum port speed of 8-Gbps or 10-Gbps.

		Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
		Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
	OL-29284-01, Release 6.x			3-1
	OL-29284-01, Release 6.x			3-1

Image 79

Cisco Systems DSC9148D8G48PK9 manual Information About Fibre Channel Interfaces, Generations of Modules and Switches

Contents

Americas Headquarters Cisco MDS 9000 Family NX-OS Interfaces Configuration GuidePage N T E N T S TL Ports Specifying a Port Owner Configuring Fibre Channel Interfaces Information About Interface Buffers Default Settings Deleting an Interface from a PortChannel Verifying NPV Monitoring Ports in a Vsan Xii About This Guide Port Monitor Configuring Port Added information about 22aEnhancements Monitor Policy Feature Port Monitor Port Guard Three new counters for the port Monitor commandMonitoring Monitoring a selected port group FlexAttachEnhancements Organization AudienceChapter Title Description Boldface font Document ConventionsRelated Documentation Troubleshooting and Reference Command-Line InterfaceFibre Channel Port Rate Limiting Trunks and PortChannelsPort Virtualization Extended CreditsFlexAttach Interfaces Overview FlexAttach OL-29284-01, Release Information About Interfaces Configuring InterfacesInterface Modes Interface DescriptionFL Port PortNP Ports TE Port TL PortTF Port ST Port Auto ModeTNP Port SD PortReason Codes Administrative StatesInterface States Operational StatesNone Administrative Operational Configuration Status Reason CodeReason Codes for Interface States Reason Code long version Description Modes ApplicableReason Codes for Nonoperational States Graceful Shutdown Frame Encapsulation Port Administrative SpeedsAutosensing Speed LEDs Bit Error ThresholdsCisco MDS 9000 Family Switch Interface Modes Beacon LEDsExtended transmitters assigned to Cisco-supported SFPs SFP Transmitter TypesSFP Transmitter Acronym Definitions Supported TL Port Translations TL PortsCWDM-1590 CWDM-1610 C1590 C1610 Translation from Translation to ExamplePort Guard TL Port Alpa CachesThreshold Interval Rising Falling Counter Type Seconds Event Port MonitorRising Threshold Local SwitchingPort Monitor Port Guard Port Group MonitorManagement Interfaces Slow Drain Device Detection and Congestion AvoidanceVsan Interfaces Generation 1 Interface Configuration GuidelinesPrerequisites for Interfaces Guidelines and LimitationsVsan Interface Configuration Guidelines Private Loop Configuration GuidelinesParameters Default Default SettingsConfiguring Interfaces 7lists the default settings for interface parametersCommand Purpose Configuring Fibre Channel InterfacesConfiguring Interface Modes Setting the Interface Administrative StateDefault unless user configured Configuring System Default Port Mode FSets the administrative mode of Fibre Channel ports to Mode F if applicableConfiguring 10-Gbps FC Mode Configuring ISL between Two SwitchesConfiguring Port Administrative Speeds Configuring the Interface Description Configuring Port Speed GroupSpecifying a Port Owner Configuring Beacon ModeEnters configuration mode Interface configuration submodeConfiguring Switch Port Attribute Default Values Disabling Bit Error ThresholdClearing the Alpa Cache Configuring TL PortsConfigures manual entries into the Alpa cache Manually Inserting Entries into the Alpa CacheConfiguring Port Guard Disables port monitoring Configuring Port MonitorTo enable port monitor, follow these steps Enables default port monitoringConfiguring a Port Monitor Policy Reverts to the default policy for Tx performance Specifies the delta protocol error poll intervalSpecifies the delta signal loss poll interval Reverts to the default policy for sync lossConfiguring Port Group Monitor Configuring a Port Monitor Port GuardActivating a Port Monitor Policy Enabling Port Group Monitor Configuring a Port Group Monitor PolicyTurning Off the Monitoring of Specific Counter Reverting to the Default Policy for a Specific CounterActivating a Port Group Monitor Policy Configuring Management InterfacesCreating Vsan Interfaces Configuring Stuck Frame Timeout Value Configuring Congestion Frame Timeout ValueConfiguring No-Credit Timeout Value Specifies the default no-credit timeout value port Configuring Credit Loss Recovery Threshold and ActionSpecifies the no-credit timeout value and port Mode for the switchConfiguring Interfaces Verifying Interfaces Configuration Verifying Interfaces ConfigurationDisplaying Interface Information Discards, 0 errorsExample 2-3 Displays All Interfaces Interface fc1/1 5 , fc2/5 Example 2-4 Displays Multiple, Specified InterfacesInterface fc3/13 , fc3/16 Example 2-5 Displays a Specific Interface Switch# show interface fc2/2 fc2/2 is trunkingFrames/sec Switch# show interface brief Switch# show interface descriptionExample 2-6 Displays Port Description Example 2-8 Displays Interface Counters Switch# show interface counters fc3/1Example 2-9 Displays Interface Counters in Brief Format Switch# show interface counters briefExample 2-10 Displays Transceiver Information Switch# show running-configSystem default switchport mode F interface fc4/1 Switch# show running-config interface fc1/1Displaying TL Port Information Switch# show tlport listExample 2-17 Displays the TL Ports in All VSANs Displaying Port Monitor Status and Policies Displaying the Alpa Cache ContentsPort-monitor active Switch# show port-monitorDisplaying Port Group Monitor Status and Policies Switch# show port-group-monitor statusPgm2 Switch# show port-group-monitorDefault Pgm1Switch# show interface mgmt 0 mgmt0 is up Displaying Management Interface ConfigurationDisplaying Vsan Interface Information OL-29284-01, Release Information About Fibre Channel Interfaces Generations of Modules and SwitchesAny-to-any connectivity Generation 3 Fabric SwitchPart Number Product Name and Description Backplane crossbar bandwidthProduct Name Generation 2 Fabric SwitchesPort Groups MaximumGeneration 3 Modules Generation 3 Fabric SwitchesDS-C9148-K9 Port 8-Gbps Cisco MDS Fabric switch Part Number Description Per Port Group GbpsPort Rate Modes Mode and Rate Supports Default Speed Product NameSwitches Auto Gbps Auto with 4-Gbps maximum Dedicated Rate ModePart Number Description Mode Mode on All Ports Configured Speed Reserved BandwidthAuto Gbps Auto with 2-Gbps maximum Shared Rate ModeModules Dedicated Rate Mode Configurations for the 8-Gbps ModulesNegotiates to a maximum speed of 8 Gbps Port SpeedDynamic Bandwidth Management Negotiates to a maximum speed of 4 GbpsOversubscription Ratio Restrictions Out-of-Service InterfacesBandwidth Allocation for Oversubscribed Interfaces Switch# show port-resources module 8 ModuleSwitch# show port-resources module Fc5/12 Shared Port-Group Total bandwidth is 32.4 Gbps Fc5/31 Buffers Gbps Switch# show module 2 bandwidth-fairness Upgrade or Downgrade ScenarioBandwidth Fairness Guidelines and Limitations Switch# show port index-allocation Local Switching LimitationsPort Index Limitations Port Index Requirements for Generation 1 Modules Switch# show moduleNumber of Port Indexes Required Generation 1 Module Supervisor-1 Module Supervisor-2 ModulePortChannels have the following restrictions PortChannel LimitationsShow port index-allocation startup Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide PortChannel PortChannel Configuration and Addition ResultsNew Member Members PortChannel Type Addition Type Result If resources are not available Shared Dedicated Default Port 4-Gbps Port 10-Gbps Parameter Switching ModuleSpeed mode Auto Auto1 Rate mode Shared AutoPort mode BBcredit buffers Configuring Fibre Channel Interfaces14 Default Generation 4 Interface Parameters Configure the port mode Configure the rate mode dedicated or sharedConfigure the rate mode dedicated or shared to use Task Flow for Configuring 4-Port 10-Gbps Module Interfaces Task Flow for Configuring 12-Port 4-Gbps Module InterfacesConfiguring Port Speed Switch# show interface fc 9/1 fc9/1 is up Configuring Rate ModePort-resources command to Displaying the Rate Mode Configuration for InterfacesSwitch# show port-resource module 4 Module Fc4/1232 8.0 shared Port-Group Total bandwidth is 12.8 Gbps Switch# show port-resources module 7 Module Fc7/13 Configuring Local Switching Disabling Restrictions on Oversubscription Ratios Buffers Gbps Fc2/1 Shared Fc2/2 Fc2/3 Shut down Switch# show running-config include oversubscription-limitSwitch# copy running-config startup-config Enabling Restrictions on Oversubscription RatiosEnabling Bandwidth Fairness Selects the interface and enters interface Taking Interfaces Out of ServiceConfiguration submode Disabling Bandwidth FairnessReleasing Shared Resources in a Port Group Disables the interfaceTakes the interface out of service Fc9/2 out-of-serviceDisabling ACL Adjacency Sharing for System Image Downgrade Verifying Fibre Channel Interfaces ConfigurationSwitch# show interface fc 4/1 capabilities Switch# show interface fc 9/1 capabilitiesDisplaying Interface Capabilities Displaying SFP Diagnostic Information Configuration Examples for Fibre Channel InterfacesSelect the interfaces fc 4/3 through fc 4/4 Configuration Example for 48-Port 8-Gbps Module InterfacesConfiguration Example for 24-Port 8-Gbps Module Interfaces Enable the interfaces and return to configuration modeSelect the interfaces fc 3/2 through fc 3/3 Disable the interfaces and take them out of serviceReturn to configuration mode Select interfaces fc 3/1Select the interfaces fc 4/1 through fc 4/6 Configuration Example for 48-Port 4-Gbps Module InterfacesSwitchconfig# interface fc 4/2 Select the interfaces fc 4/2 through fc 4/10Select the interfaces fc 4/7 through fc 4/10 Configuration Example for 24-Port 4-Gbps Module InterfacesSelect the interfaces fc 3/4 through fc 3/6 OL-29284-01, Release Buffer-to-Buffer Credits Information About Interface BuffersBuffer Pools Performance BuffersTotal BB credit buffers 189047 BBCredit Buffers for Switching Modules Fx Port Shared Rate ModeBBCredit Buffers Per Port Gbps Speed BBCredit Buffer AllocationPort 8-Gbps Switching Module BBCredit Buffer Allocation Default BBcredit buffers 250 Maximum BBcredit buffers 500Ports 1 through Ports 13 through 6000 Default BBcredit buffers 500 Maximum BBcredit buffers24-Port 8-Gbps Switching Module BBCredit Buffer Allocation Total Number of BBCredit Buffers per Module4/44-Port 8-Gbps Switching Module BBCredit Buffer Allocation Three ports with dedicated rate mode and 4-Gbps speed48-Port 4-Gbps Switching Module BBCredit Buffer Allocation Dedicated Rate ModeGbps Speed Gbps Port 4-Gbps Fibre Channel Module BBCredit Buffers 24-Port 4-Gbps Switching Module BBCredit Buffer Allocation12-Port 4-Gbps Switching Module BBCredit Buffer Allocation Port 4-Gbps Switching Module BBCredit BuffersGbps Speed BBCredit Buffer Allocation Type ISL Fx Port ISL Port Port 10-Gbps Switching Module BBCredit Buffers4-Port 10-Gbps Switching Module BBCredit Buffer Allocation Gbps Speed BBCredit Buffer Allocation TypePort 8-Gbps Fabric Switch BBCredit Buffer Allocation BBCredit Buffers for Fabric SwitchesCisco MDS 9148 Fabric Switch BBCredit Buffers Cisco MDS 9134 Fabric Switch BBCredit BuffersExtended BBCredits Cisco MDS 9124 Fabric Switch BBCredit BuffersUser-configurable BBcredit buffers 4509 250 MDS 9124 Fabric Switch BBCredit Buffer Allocation DefaultsPort Group Support for the Extended BBCredits Feature Extended BBcredits on Generation 1 Switching ModulesOL-29284-01, Release Buffer-to-Buffer State Change Number Buffer-to-Buffer Credit RecoveryConfiguring Buffer-to-Buffer Credits Configuring Interface BuffersReceive Data Field Size Configuring Performance Buffers Configuring Extended BBcredits Configuring Receive Data Field Size Enabling Buffer-to-Buffer Credit RecoveryEnabling the Buffer-to-Buffer State Change Number Bytes and the range is from 256 to 2112 bytes Verifying BBCredit ConfigurationInterface to 2000 bytes. The default is Reduces the data field size for the selectedCisco MDS 9000 Family NX-OS Interfaces Configuration Guide Trunking E Ports Information About TrunkingLink Number Link Description Trunking F Ports1a and 1b Port trunk with N port Port trunk with NP port PortChannnel with NP port Trunking NP port with third-party core switch F portKey Concepts Trunking ProtocolsPort Type Core Switch NPV Switch Trunking State Link Mode Trunk Link DefaultYour Trunk Mode Configuration Port Type Switch Trunking State Port ModeVsan and VF-ID Reservations Trunk-Allowed Vsan Lists and VFIDsAre General Guidelines and Limitations Operational and Allowed Vsan ConfigurationDifference Between TE Ports and TF-TNP Ports Upgrade and Downgrade LimitationsSwitchconfig-if#switchport trunk allowed vsan Switch# show interface fc2/15W7# show interface fc1/13 Sw7# show interface fc1/13Vsan Mismatch Trunking Misconfiguration ExamplesEnabling the Cisco Trunking and Channeling Protocols Configuring TrunkingConfiguring an Allowed-Active List of VSANs Configuring Trunk ModeEnabling the F Port Trunking and Channeling Protocol Verifying Trunking Configuration Configure the port mode to NP on the NPV switch Configuration Example for F Port TrunkingEnable Npiv on the MDS core switch Configure the trunk mode to on on the MDS core switchSwitchconfig# copy running-config startup-config Save the configurationOL-29284-01, Release Information About PortChannels Configuring PortChannelsPortChannels PortChannels OverviewPortChannel Flexibility PortChanneling and Trunking TF PortChannelsTrunking Only PortChanneling and Trunking Load BalancingSID1 and DID1-Based Load Balancing SID1, DID1, and Exchange-Based Load Balancing PortChannel ModesInterfaces in a PortChannel On Mode Active ModeChannel Group Configuration Differences PortChannel DeletionCompatibility Check Interface Addition to a PortChannelForcing an Interface Addition PortChannel ProtocolsInterface Deletion from a PortChannel Autocreating Channel Groups Channel Group CreationAutocreation User-Configured Channel Group Autocreated Channel GroupPrerequisites for PortChannels Manually Configured Channel GroupsConfiguring PortChannels Guidelines and Limitations TF PortChannel Limitations Generation 1 PortChannel LimitationsValid and Invalid PortChannel Examples 7provides examples of valid PortChannel configurationsMisconfigured Configurations 3lists the default settings for PortChannelsDefault PortChannel Parameters Default on mode Configuring PortChannelsConfiguring the PortChannel Mode Configures the specified PortChannel 1 usingAdding an Interface to a PortChannel Deleting PortChannelsDeleting an Interface from a PortChannel Forcing an Interface AdditionEnabling and Configuring Autocreation Verifying PortChannel ConfigurationConverting to Manually Configured Channel Groups Port-channel database Switch# show port-channel summarySwitch# show port-channel database port-channel Example 6-1 Displays the PortChannel SummaryExample 6-5 Displays the Consistency Status with Details Switch# show port-channel consistencySwitch# show port-channel consistency detail Example 6-4 Displays the Consistency Status without DetailsExample 6-9 Displays the Specified PortChannel Interface Example 6-6 Displays the PortChannel UsageExample 6-7 Displays the PortChannel Compatibility Example 6-8 Displays Autocreated PortChannelsExample 6-10 Displays the PortChannel Summary Configuration Examples for F and TF PortChannelsCreate the PortChannel on the MDS core switch Create the PortChannel on the NPV switchSwitchconfig# interface port-channel Create the PortChannel in dedicated mode on the NPV switchCisco MDS 9000 Family NX-OS Interfaces Configuration Guide NPV Overview Configuring N Port VirtualizationPort Virtualization Port Identifier VirtualizationNpiv Example Cisco NPV Fabric Configuration NPV Mode NP Links NP PortsInternal Flogi Parameters Parameter Derived From Default Port NumbersInternal Flogi Parameters Traffic Map NPV CFS Distribution over IPNPV Traffic Management AutoDisruptive Multiple Vsan SupportNPV Guidelines and Requirements NPV Traffic Management Guidelines Dpvm Configuration GuidelinesEnabling N Port Identifier Virtualization Configuring N Port VirtualizationConfiguring NPV NPV and Port Security Configuration GuidelinesDisables Npiv mode on the NPV core switch To configure NPV using the CLI, perform the following tasksOn the NPV core switch, enters configuration Enables Npiv mode on the NPV core switchConfiguring NPV Traffic Management Enabling the Global Policy for Disruptive Load Balancing Verifying NPV ConfigurationSwitch# show fcns database detail Switch# show fcns databaseVerifying NPV Switch# show npv internal info traffic-map Switch# show npv flogi-tableVerifying NPV Traffic Management OL-29284-01, Release FlexAttach Virtual pWWN Information About FlexAttach Virtual pWWNSAN Device Virtualization SDV FlexAttach Virtualization FlexAttach Virtual pWWN CFS DistributionDifference Between SDV and FlexAttach Virtualization Security Settings for FlexAttach Virtual pWWN Configuring FlexAttach Virtual pWWNAutomatically Assigning FlexAttach Virtual pWWN Mapping pWWN to Virtual pWWN Manually Assigning FlexAttach Virtual pWWNTo map pWWN to virtual pWWN, perform this task Verifying FlexAttach Virtual pWWN ConfigurationCommits the configuration Specified virtual pWWN and the real pWWN must not be loggedMonitoring FlexAttach Virtual pWWN Error Description WorkaroundVerifying the End Device Error Description Workaround OL-29284-01, Release Information About Port Tracking Configuring Port TrackingDefault Port Tracking Parameters 1lists the default settings for port tracking parametersInformation About Configuring Linked Ports Configuring Port TrackingEnabling Port Tracking Information About Tracking Multiple Ports Binding a Tracked Port OperationallyInformation About Monitoring Ports in a Vsan Tracking Multiple PortsMonitoring Ports in a Vsan Linked port Displaying Port Tracking InformationInformation AboutForceful Shutdown Forcefully Shutting Down a Tracked PortSwitch# show interface port-channel Switch# show interface fc1/1Port linked to interface fc1/1 Switch# show interface fc 1/5 Example 9-4 Displays a Forced Shutdown ConfigurationPort 10-Gbps switching modules Bandwidth fairness Default settings Example configurationsAsterisk First operational port IN-2 IN-3 Deleting from PortChannelsMPS-14/2 modules Configuring extended BBcredits Configuring descriptionsIN-5 IN-6 Trunk mode Administrative default Configuring TL ports Alpa caches ConfiguringStatus Trunk ports Displaying information IN-8