Cisco Systems DSC9148D8G48PK9 manual Sw7# show interface fc1/13, W7# show interface fc1/13

Chapter 5 Configuring Trunking

Guidelines and Limitations

Port WWN is		20:4f:00:0d:ec:6d:2b:40
Peer port	WWN is 20:0a:00:0d:ec:3f:ab:80
Admin port mode is auto, trunk mode is on
snmp link	state traps are enabled
Port mode	is TE
Port vsan	is 1
Speed is 2 Gbps
Rate mode	is dedicated
Transmit B2B Credit is 16
Receive B2B		Credit is 250
B2B State	Change Number is 14
Receive data field Size is 2112
Beacon is	turned off
Trunk vsans		(admin allowed and active) (1,100-101,1101,1163-1166,1216,2172,2182-2183)
Trunk vsans		(up)	(1,1101,1163-1166,1216,2172,2182-2183)
Trunk vsans		(isolated)	(100-101)
Trunk vsans		(initializing)	()

In case of TF ports, after the handshake, one of the allowed VSANs will be moved to the up state. All other VSANs will be in initializing state even though the handshake with the peer is completed and successful. Each VSAN will be moved from initializing state to up state when a server or target logs in through the trunked F or NP ports in the corresponding VSAN.

Note In case of TF or TNP ports, the Device Manager will show the port status as amber even after port is up and there is no failure. It will be changed to green once all the VSAN has successful logins.

This example shows a TF port information after the port is in the up state:

sw7# show interface fc1/13

fc1/13 is trunking (Not all VSANs UP on the trunk)

Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) Port WWN is 20:0d:00:0d:ec:6d:2b:40

Admin port mode is FX, trunk mode is on snmp link state traps are enabled Port mode is TF

Port vsan is 1 Speed is 4 Gbps Rate mode is shared Transmit B2B Credit is 16 Receive B2B Credit is 32 Receive data field Size is 2112 Beacon is turned off

Trunk vsans (admin allowed and active) (1,100-101,1101,1163-1166,1216,2172,2182-2183)

Trunk vsans (up)		(1)
Trunk vsans	(isolated)	()
Trunk vsans	(initializing)	(1101,1163-1166,1216,2172,2182)

This example shows the TF port information when a server logs in on noninternal FLOGI VSAN. VSAN 2183 is moved to the up state when the server logs in to VSAN 2183.

w7# show interface fc1/13

fc1/13 is trunking (Not all VSANs UP on the trunk)

Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) Port WWN is 20:0d:00:0d:ec:6d:2b:40

Admin port mode		is FX, trunk mode is on
snmp link state		traps are enabled
Port mode is	TF
Port vsan is	1
Speed is 4 Gbps
Rate mode is	shared
Transmit B2B	Credit is 16
		Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
OL-29284-01, Release 6.x			5-9