Cisco Systems DSC9148D8G48PK9 manual Default Settings, Configuring Interfaces, Parameters Default

Chapter 2 Configuring Interfaces

Default Settings

Default Settings

Table 2-7lists the default settings for interface parameters.

Table 2-7	Default Interface Parameters
Parameters		Default
Interface mode		Auto
Interface speed		Auto
Administrative state		Shutdown (unless changed during initial setup)
Trunk mode		On (unless changed during initial setup) on
		non-NPV and NPIV core switches. Off on NPV
		switches.
Trunk-allowed VSANs or VF-IDs		1 to 4093
Interface VSAN		Default VSAN (1)
Beacon mode		Off (disabled)
EISL encapsulation		Disabled
Data field size		2112 bytes

Configuring Interfaces

This section includes the following topics:

•Configuring Fibre Channel Interfaces, page 2-21

•Setting the Interface Administrative State, page 2-22

•Configuring Interface Modes, page 2-22

•Configuring System Default Port Mode F, page 2-23

•Configuring Port Administrative Speeds, page 2-25

•Configuring Port Speed Group, page 2-26

•Configuring the Interface Description, page 2-26

•Specifying a Port Owner, page 2-27

•Configuring Beacon Mode, page 2-27

•Disabling Bit Error Threshold, page 2-28

•Configuring Switch Port Attribute Default Values, page 2-28

•Configuring TL Ports, page 2-29

•Manually Inserting Entries into the ALPA Cache, page 2-29

•Clearing the ALPA Cache, page 2-29

•Configuring Port Guard, page 2-30

•Configuring Port Monitor, page 2-31

•Configuring Port Group Monitor, page 2-34

	Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
2-20	OL-29284-01, Release 6.x