Cisco Systems DSC9148D8G48PK9 manual Configuring a Port Monitor Policy

Chapter 2 Configuring Interfaces

Configuring Interfaces

Configuring a Port Monitor Policy

Detailed Steps

To configure a port monitor policy, follow these steps:

	Command		Purpose
Step 1
	switch# config t		Enters configuration mode.
Step 2
	switch(config)# port-monitor	name policyname	Specifies the policy name and enters the port
			monitoring policy configuration mode.
	switch(config)# no port-monitor name		Removes the policy.
	policyname
	switch# config t		Enters configuration mode.
Step 3
	switch(config-port-monitor)#	port-type	Applies the policy to the access ports.
	access-port
	switch(config-port-monitor)#	port-type trunks	Applies the policy to the trunk ports.
	switch(config-port-monitor)#	port-type all	Applies the policy to all ports.
Step 4
	switch(config-port-monitor)#	counter	Specifies the delta credit loss recovery counter,
	credit-loss-reco poll-interval seconds		poll interval in seconds, the thresholds in
	percentage1 event event-id delta		percentage, and the event IDs of events.
	rising-threshold percentage1 event event-id
Step 5
	switch(config-port-monitor)# monitor counter		Activates the err-pkt-from-port counter.
	err-pkt-from-port1		Specifies the delta err-pkt-from-port counter,
	switch(config-port-monitor)# counter		poll interval in seconds, the thresholds in
	err-pkt-from-port1poll-interval seconds		percentage, and the event IDs of events.
	delta rising-threshold eventcount1 event
	event-idfalling-threshold2eventcount2 event
	event-id
Step 6
	switch(config-port-monitor)# monitor counter		Activates the err-pkt-from-xbar counter.
	err-pkt-from-xbar1		Specifies the delta err-pkt-from-xbar counter,
	switch(config-port-monitor)# counter		poll interval in seconds, the thresholds in the
	err-pkt-from-xbar1poll-interval seconds		count of error frame events, and the event IDs of
	delta rising-threshold eventcount1 event		events.
	event-id
Step 7
	switch(config-port-monitor)# monitor counter		Activates the err-pkt-to-xbar counter.
	err-pkt-to-xbar1		Specifies the delta err-pkt-to-xbar counter, poll
	switch(config-port-monitor)# counter		interval in seconds, the thresholds in the count of
	err-pkt-to-xbar1poll-interval seconds delta		error frame events, and the event IDs of events.
	rising-threshold eventcount1 event event-id
	falling-threshold2eventcount2 event event-id
Step 8
	switch(config-port-monitor)# counter		Specifies the delta invalid CRC, poll interval in
	invalid-crc poll-interval seconds delta		seconds, the thresholds in percentage, and the
	rising-threshold percentage1 event event-id		event IDs of events to be triggered.
	falling-threshold2percentage2 event event-id
Step 9
	switch(config-port-monitor)# counter		Specifies the delta invalid words, poll interval in
	invalid-words poll-interval seconds delta		seconds, the thresholds in percentage, and the
	rising-threshold percentage1 event event-id		event IDs of events to be triggered.
	falling-threshold2percentage2 event event-id

	Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
2-32	OL-29284-01, Release 6.x