Cisco Systems DSC9148D8G48PK9 manual Displaying TL Port Information, Switch# show tlport list

Chapter 2 Configuring Interfaces

Verifying Interfaces Configuration

Example 2-15 Displays Interface Information in a Brief Format After the System Default Switchport Mode F Command is Executed

switch# show interface brief

-------------------------------------------------------------------------------

Interface Vsan	Admin	Admin Status	SFP	Oper	Oper	Port
	Mode	Trunk		Mode	Speed	Channel
		Mode			(Gbps)

-------------------------------------------------------------------------------

fc4/1	1	F	--	notConnected	swl	--	--
fc4/2	1	F	--	notConnected	swl	--	--
fc4/3	1	F	--	notConnected	swl	--	--
fc4/4	1	F	--	notConnected	swl	--	--
fc4/5	1	F	--	sfpAbsent	--	--	--
fc4/6	1	F	--	sfpAbsent	--	--	--
fc4/7	1	F	--	sfpAbsent	--	--	--
fc4/8	1	F	--	sfpAbsent	--	--	--
fc4/9	1	F	--	sfpAbsent	--	--	--

Example 2-16 Displays Interface Information in a Brief Format After Two Interfaces Are Individually Configured for Mode FL

switch# show interface brief

-------------------------------------------------------------------------------

Interface Vsan	Admin	Admin Status	SFP	Oper	Oper	Port
	Mode	Trunk		Mode	Speed	Channel
		Mode			(Gbps)

-------------------------------------------------------------------------------

fc4/1	1	FL	--	notConnected	swl	--	--
fc4/2	1	F	--	notConnected	swl	--	--
fc4/3	1	FL	--	notConnected	swl	--	--
fc4/4	1	F	--	notConnected	swl	--	--
fc4/5	1	F	--	sfpAbsent	--	--	--
fc4/6	1	F	--	sfpAbsent	--	--	--
fc4/7	1	F	--	sfpAbsent	--	--	--
fc4/8	1	F	--	sfpAbsent	--	--	--
fc4/9	1	F	--	sfpAbsent	--	--	--
fc4/10	1	F	--	sfpAbsent	--	--	--

Displaying TL Port Information

The show tlport command displays the TL port interface configurations. This command provides a list of all TL ports configured in a switch and shows the associated VSAN, the FC ID for the port (only domain and area are valid), and the current operational state of the TL port (up or initializing). See Example 2-17through Example 2-20.

Example 2-17 Displays the TL Ports in All VSANs

switch# show tlport list

-------------------------------

Interface Vsan FC-ID State

------------------------- ------

fc1/16 1 0x420000 Init

fc2/26 1 0x150000 Up

TL ports allow a private device (devices that physically reside on the loop) to see a fabric device and vice-versa by proxying fabric devices on the loop. Fabric devices are proxied by allocating each fabric device an ALPA on this loop.

	Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
2-50	OL-29284-01, Release 6.x