Map Configuration, Initializing the Temp Map | ADTRAN TSU 120e

Chapter 8. Telnet/Terminal Menus

You can use the ARROW KEYS or Number Keys to move the cur- sor from one selection to another. Use the Enter Key to perform the action displayed in the LCD to the right of the cursor.

Map Configuration

Map configuration consists of the following steps:

Step	Action

1	Initialize the Temp Map to one of three
	configurations:
	• Current Map A
	• Current Map B
	• All Idles
	This step is optional.

2	Edit the Temp Map so that it reflects the desired
	map configuration.

3	Replace the current DS0 Map A or Map B
	configuration with the Temp Map configuration.

Initializing the Temp Map

Upon entering the DS0 maps configuration menu, the Temp map reflects its last configured state.

If you want to...	Use these selections...

initialize the displayed Temp Map to	1 - 3
one of three configurations.

initialize the Temp Map from its	1 , 2
current configuration to one which
reflects the currently stored Map A or
B configurations, respectively.

initialize the Temp Map to an all	3
IDLE state.

61202129L1-1

TSU 120 User Manual

8-3

Image 101

ADTRAN TSU 120e user manual Map Configuration, Initializing the Temp Map, If you want to Use these selections

Contents

Part Number 1202129L1 1202129L2 TSU 120 & 120e Trademarks Mail Adtran Web Site Product Matrix Faxback Document LineY2K Project Line Page REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Xiv Table of Contents Chapter Status Menu Chapter Operation Chapter Utility Menu Chapter Configuration Menu Chapter Telnet/Terminal Menus Chapter Test Menu Index Index-1 Table of Contents List of Figures List of Figures List of Tables List of Tables TSU 120 Overview Introduction Standard Features in the TSU OCU DP TSU Option ModulesDSU DP BR1TE Router, PBX, Video Conferencing Applications TSU 120 Configuration ApplicationsOption Module Architecture Receipt Inspection UNPACK, INSPECT, Power UPAdtran Shipments Include Customer Provides Grounding Instructions Power Connection Installation TSU 120e Rear Panel Identification of Rear Panel Layout Nx56/64 Serial Interface TSU 120e only TSU 120 InterfacesNetwork Test Interface DSX-1 Test Interface DSX-1 PBX InterfaceChain Port Input Chain Port Output Self-Test Power Up TestingInitialization Set User Passcode Chain-in/Chain Out Set Chain Port InputChain-In PC Power-Up Procedure Installation Front Panel Descriptions Name Front Panel Button. See Operation Keys on LED Descriptions CSU Status TSU 120 Front Panel Layout Module Status DSU/DSX Status General Menu Operation Operation Keys Step Action Select and Activate a Menu Item Display Only Data Fields Set the Data Field Exit Any Menu Field Operation Or Display Data Port Identification Front Panel Menu Structure Config ConfigurationStatus Util Utilities Watch Pro/LAN Connection Alternate Methods of ControlWatch Pro Adtran PC Program Snmp Watch Pro/EIA-232 Connection Telnet Terminal Mode Status Menu Network Interface Performance Report Network Performance Reports NI Perf Rpts Active Alarms Network Interface Errors NI Errors Port Status View History DTE Status Nx56/64 Menu Items DTE Data/ClockPort Rate DBU Data/CNTRL TSU 120e only DBU Contrl TSU 120e only DSX-1 Menu Items DSX-1 ErrorsDBU Status TSU 120e only YES/NO indication of active DBU status Enet Status TSU 120e only Clear Port Alarm Clear Port AlmRemote Port Status Menu Configuration Menu Complete Configuration Menu Menu Item Description Network NINetwork NI Menu Items Inband SET LBOLpbck BIT TSU 120 Clock Sources Network Timed Clock Source Network Timed DSX-1 Timed Clock Source Base DSX-1 Timing DTE Timed Clock Source DTE Timing Internal Clock Source Internal Timing Secondary Timing Normal CSU Normal CSU Timing Unit Menu IP Address DefaultSubnet Mask Map In Use AB Map Exchange Map XchngOFF Auto Copy a B Temp DS0 Map a and DS0 Map BCreate Temp Review MAP AB Edit Temp Review TempApply Temp AB DSO Map Example Create Temp Selection Screen Nx56/64 Port Configuration Port Config Menu Items Port Configuration Port ConfigNx56/64 Menu Items Description DS0 Rate CTS DataDCD DSR TX CLK Source Inband ModeNormal Mode of Operation Backup Mode DBU Configuration Menu Items TSU 120e onlyBackup on Backup Delay Retry Delay Restore DelayBackup Testing Disable HR Enable HRDSX-1 Port Configuration Port Config Menu Items Yellow Alarm Line Length FT SignalingIN-BAND Loopback Utility Menu Complete Utility Menu Tree Time/Date Factory Restore Fact RestoreSet Passcode If you want to Do this Change/Set a Passcode Unit IDPasscode Automatic Time-out No Passcode Desired Software Revision Software Rev CMD ModePort Utility Option Ports Enet Address TSU 120e only Utility Menu Test Menu Complete Test Menu Tree Loopback Tests Network TestsNetwork Interface Loopbacks Line Loopback Activates the line loopback Network Loopback Tests Qrss Pattern Test Patterns All ZerosAll Ones Example Terminates pattern generation Run Self-test Port Tests Loop is deactivated Port Test Menu Items for 0.1 Nx56/64 DBU Loopback TSU 120e only Cancel TestsDBU Test TSU 120e only DBU TST Result TSU 120e only Telnet/Terminal Main Menu Main Menu DS0 Maps Configuration Menu Status, Config, Util, and Test Menu Options If you want to Use these selections Map ConfigurationInitializing the Temp Map Explanation Editing the Temp MapApplying the Temp Map Reviewing Maps Unit Access Table Remote Menu AccessManagement Configuration Unit Access Table Add New Unit Modify Unit Default Unit PasscodeDelete Unit Snmp Read Community Host 1 Trap IP Address Snmp Trap CommunityHost 2 Trap IP Address Host 3 Trap IP Address Telnet/Terminal Password Telnet/Terminal TimeoutSystem Location Auth. Fail Traps Sent Quit Session Flash Download Basic Components About SnmpNetwork Manager Agent Messages CommandsGetRequest GetNextRequest Trap TSU 120 Snmp Access Snmp Trap Configuration Table A-1. How to Configure Network Manager MIB Snmp MIB Browser Configuration Standard MIBs Adtran Enterprise-specific MIBs Snmp MIB Files Supported by the TSUAdtran Product MIB ADTRAN.MIB Ftp.adtran.com Appendix B Understanding TR-08 OOF Table B-1. Alarm ConditionsFelp Table B-2.TR-08 DS0 Conversion Table TR-08 DS0 Conversion TableDS0 TR-08 Channel Number Port Appendix B. Understanding TR-08 Network Pinouts WiringConnections Table C-1. Network Pinouts Table C-2. Control In/Chain in Pinout Control In/Chain Table C-3. Chain Out Pinout Chain Out Table C-4. V.35 Pinout Nx56/64 DTE Connector type Part numberNx56/64 DTE Base DSX-1 PBX Connector type RJ-48CTable C-5. Pinout Connectors for Modular Jack Interface 10BaseT TSU 120e only Connector type UsocTable C-6 BaseT Ethernet TSU 120e only Pin Name to NIC Nx56/64 Interface Alarm MessagesNetwork Interface NI Status Messages Following messages indicate the status of the Nx56/64 card Appendix D. System Messages Compatibility Electrical SpecificationsT1/FT1 Interface DSX-1 Interface Nx56/64 V.35 InterfaceCTS, DCD, DSR Management Interfaces Chassis SpecificationsChain In/Out Ports Option Slot Interface Input Power Environmental SpecificationsFuse Operating Temperature Max Power Numerics Index GetNextRequest Snmp A-5 Index-4 61202129L1-1 Index-5 Index-6 61202129L1-1 Repair and Return Presales Inquiries and Applications SupportPost-Sale Support