DSU/DSX Status, Module Status | ADTRAN TSU 120e specification

Chapter 3. Operation

DSU/DSX Status

The DSU/DSX status LEDs display the operational condition of the Nx56/64 and DSX-1 parts included in the TSU 120. It also reflects the status of the DBU in the TSU 120e.

OK (GREEN) Indicates the operation is in the normal mode

	and no errors have been detected.
TEST	Indicates that one of the interfaces is operating
(YELLOW)	in a test mode. This includes a self-test or a test
	loopback. When lighted, this LED also indicates
	that normal data flow is not occurring in at least
	one of the module ports.

ALARM (RED) Indicates an alarm condition has been detected. When the alarm condition is no longer valid, the OK LED activates (turns on). To view an alarm condition, select the active alarm menu item or select Alarm by pressing Shift+8. If the alarm conditions have been corrected, the alarm which caused the activation of the Alarm LED can be viewed under the Unit History Menu.

Module Status

The module status LEDs display the operational condition of ports installed in the option slots.

OK (GREEN) Indicates the operation is in the normal mode

	and no errors have been detected.
TEST	Indicates that one of the interfaces is operating
(YELLOW)	in a test mode. This includes a self-test or a test
	loopback. When lighted, this LED also indicates
	that normal data flow is not occurring in at least
	one of the module ports.

3-4

TSU 120 User Manual

61202129L1-1

Image 42

ADTRAN TSU 120e user manual DSU/DSX Status, Module Status

Contents

TSU 120 & 120e Part Number 1202129L1 1202129L2 Trademarks Adtran Web Site Product Matrix Faxback Document Line Y2K Project LineMail Page REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Xiv Table of Contents Chapter Operation Chapter Status Menu Chapter Configuration Menu Chapter Utility Menu Chapter Test Menu Chapter Telnet/Terminal Menus Index Index-1 Table of Contents List of Figures List of Figures List of Tables List of Tables Introduction TSU 120 Overview Standard Features in the TSU DSU DP TSU Option ModulesOCU DP BR1TE TSU 120 Configuration Applications Option Module ArchitectureRouter, PBX, Video Conferencing Applications Adtran Shipments Include UNPACK, INSPECT, Power UPReceipt Inspection Customer Provides Power Connection Grounding Instructions Installation Identification of Rear Panel Layout TSU 120e Rear Panel TSU 120 Interfaces Network Test InterfaceNx56/64 Serial Interface TSU 120e only Chain Port Input DSX-1 PBX InterfaceDSX-1 Test Interface Chain Port Output Initialization Power Up TestingSelf-Test Set User Passcode Set Chain Port Input Chain-In PCChain-in/Chain Out Power-Up Procedure Installation Front Panel Front Panel Descriptions Name LED Descriptions CSU Status Button. See Operation Keys on TSU 120 Front Panel Layout DSU/DSX Status Module Status Operation Keys General Menu Operation Select and Activate a Menu Item Step Action Set the Data Field Display Only Data Fields Data Port Identification Exit Any Menu Field Operation Or Display Status Config ConfigurationFront Panel Menu Structure Util Utilities Alternate Methods of Control Watch Pro Adtran PC ProgramWatch Pro/LAN Connection Watch Pro/EIA-232 Connection Snmp Terminal Mode Telnet Status Menu Network Performance Reports NI Perf Rpts Network Interface Performance Report Network Interface Errors NI Errors Active Alarms View History Port Status Port Rate Nx56/64 Menu Items DTE Data/ClockDTE Status DBU Data/CNTRL TSU 120e only DBU Status TSU 120e only DSX-1 Menu Items DSX-1 ErrorsDBU Contrl TSU 120e only YES/NO indication of active DBU status Clear Port Alarm Clear Port Alm Remote PortEnet Status TSU 120e only Status Menu Configuration Menu Complete Configuration Menu Network NI Network NI Menu ItemsMenu Item Description Lpbck SET LBOInband BIT TSU 120 Clock Sources Network Timed Network Timed Clock Source Base DSX-1 Timing DSX-1 Timed Clock Source DTE Timing DTE Timed Clock Source Internal Timing Internal Clock Source Secondary Timing Normal CSU Timing Normal CSU Unit Menu Subnet DefaultIP Address Mask OFF Map Exchange Map XchngMap In Use AB Auto Create Temp DS0 Map a and DS0 Map BCopy a B Temp Review MAP AB Apply Temp AB Review TempEdit Temp DSO Map Example Create Temp Selection Screen Nx56/64 Menu Items Description Port Configuration Port ConfigNx56/64 Port Configuration Port Config Menu Items DS0 Rate DCD DataCTS DSR Inband Mode Normal Mode of OperationTX CLK Source Backup on DBU Configuration Menu Items TSU 120e onlyBackup Mode Backup Delay Backup Restore DelayRetry Delay Testing DSX-1 Port Configuration Port Config Menu Items Enable HRDisable HR Yellow Alarm IN-BAND SignalingLine Length FT Loopback Utility Menu Complete Utility Menu Tree Set Passcode Factory Restore Fact RestoreTime/Date If you want to Do this Passcode Automatic Time-out Unit IDChange/Set a Passcode No Passcode Desired Port Utility Option Ports CMD ModeSoftware Revision Software Rev Enet Address TSU 120e only Utility Menu Test Menu Complete Test Menu Tree Network Interface Loopbacks Network TestsLoopback Tests Line Loopback Network Loopback Tests Activates the line loopback Test Patterns All Zeros All OnesQrss Pattern Terminates pattern generation Example Run Self-test Port Tests Port Test Menu Items for 0.1 Nx56/64 Loop is deactivated DBU Test TSU 120e only Cancel TestsDBU Loopback TSU 120e only DBU TST Result TSU 120e only Main Menu Telnet/Terminal Main Menu Status, Config, Util, and Test Menu Options DS0 Maps Configuration Menu Map Configuration Initializing the Temp MapIf you want to Use these selections Applying the Temp Map Editing the Temp MapExplanation Reviewing Maps Remote Menu Access Management ConfigurationUnit Access Table Unit Access Table Add New Unit Delete Unit Default Unit PasscodeModify Unit Snmp Read Community Host 2 Trap IP Address Snmp Trap CommunityHost 1 Trap IP Address Host 3 Trap IP Address System Location Telnet/Terminal TimeoutTelnet/Terminal Password Auth. Fail Traps Sent Flash Download Quit Session Network Manager About SnmpBasic Components Agent GetRequest CommandsMessages GetNextRequest TSU 120 Snmp Access Trap Snmp Trap Configuration Snmp MIB Browser Configuration Table A-1. How to Configure Network Manager MIB Adtran Product MIB ADTRAN.MIB Snmp MIB Files Supported by the TSUStandard MIBs Adtran Enterprise-specific MIBs Ftp.adtran.com Appendix B Understanding TR-08 Table B-1. Alarm Conditions FelpOOF DS0 TR-08 DS0 Conversion TableTable B-2.TR-08 DS0 Conversion Table TR-08 Channel Number Port Appendix B. Understanding TR-08 Connections WiringNetwork Pinouts Table C-1. Network Pinouts Control In/Chain Table C-2. Control In/Chain in Pinout Chain Out Table C-3. Chain Out Pinout Connector type Part number Nx56/64 DTETable C-4. V.35 Pinout Nx56/64 DTE Connector type RJ-48C Table C-5. Pinout Connectors for Modular Jack InterfaceBase DSX-1 PBX Table C-6 BaseT Ethernet TSU 120e only Connector type Usoc10BaseT TSU 120e only Pin Name to NIC Alarm Messages Network Interface NINx56/64 Interface Status Messages Following messages indicate the status of the Nx56/64 card Appendix D. System Messages Electrical Specifications T1/FT1 InterfaceCompatibility Nx56/64 V.35 Interface CTS, DCD, DSRDSX-1 Interface Chain In/Out Ports Chassis SpecificationsManagement Interfaces Option Slot Interface Fuse Operating Temperature Environmental SpecificationsInput Power Max Power Index Numerics GetNextRequest Snmp A-5 Index-4 61202129L1-1 Index-5 Index-6 61202129L1-1 Presales Inquiries and Applications Support Post-Sale SupportRepair and Return